
Rubber & FoamSKU IP-EPDML-38X38X6-STD
Black EPDM L Profile – 38mm x 38mm x 6mm – 3m Strip
This EPDM L profile 38mm x 38mm is a heavy 6mm thick black rubber angle trim, supplied as a 3m strip. It protects and cushions corners and edges, gives a weather-resistant seal along joints and finishes exposed corners neatly, indoors and outdoors.
At a glance
- 38mm x 38mm equal angle profile
- 6mm material thickness on both legs
- Supplied as a single 3m strip
- Excellent resistance to UV, ozone and weathering
- Works from -40°C to +120°C
- Easy to cut to length with shears or a knife
Typical uses
- Corner and edge protection for machine guards, cabinets and sheet metal
- Rubber angle trim for glass and fragile panel edges
- Sealing and finishing on doors, hatches and windows
- Trim for classic cars, caravans and rail vehicles
- Cushioning stepped edges to reduce knocks and trip damage
Which one do I need?
| Profile | Best for |
|---|---|
| 38mm x 38mm x 6mm EPDM L (this item) | Heavy-duty corner protection on large panels and guards |
| 15.5mm x 16.5mm EPDM L angle trim | Light trim and sealing on thin panels and small corners |
Technical drawing
Specification
| Material | EPDM (ethylene propylene diene monomer) |
| Colour | Black |
| Size | 38mm x 38mm equal angle |
| Thickness | 6mm |
| Strip length | 3m |
| Hardness | 69° Shore A |
| Temperature range | -40°C to +120°C |
| Tensile strength | 10.5 MPa |
| Tear strength | 12 kN/m |
| Elongation at break | 315% |
| Compression set | 7% (22 h at 70°C) |
| Tolerance class | ISO 3302-1 E2 – L2 |
How much do I need?
This rubber angle trim is sold as a single 3m strip. Measure the total length of edge or corner to cover in metres and divide by 3, rounding up. For example, a 14m run of guard edges needs 5 strips (15m in total), leaving a short offcut for repairs.
Fitting tips
- Cut to length with sharp shears or a fine-toothed saw for a clean, square end.
- Clean and degrease the mounting surface before fitting.
- Hold in place by friction on a snug corner, or bond with a polyurethane or silicone sealant.
- Mitre-cut the ends where two runs meet at an outside corner.
- Let adhesive cure fully before exposing the trim to heavy use or weather.
Complete your project
- EPDM L Profile Angle Trim – 15.5mm x 16.5mm – Per Metre
- EPDM Self-Grip Top Seal – 16mm x 32.9mm – 1mm to 3mm Panels – Per Metre
- Solid EPDM P Extrusion – 13mm x 2.5mm Weather Seal – Per Metre
Questions
Can this rubber angle be used outdoors?
Yes. EPDM has excellent resistance to UV, ozone and weathering, so it suits outdoor use.
Will it bend around corners?
At 6mm thick it follows gentle curves, but sharp corners are best mitre-cut.
How do I cut the strip?
Heavy-duty shears, a utility knife or a fine-toothed saw all give a clean cut.
Can it be recycled?
Yes. This EPDM profile is 100% recyclable at the end of its service life.
Need a different size or length? Contact our team for advice.
Product details
| SKU | IP-EPDML-38X38X6-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM L Profile – 38mm x 38mm x 6mm – 3m Strip