
Rubber & FoamSKU IP-EPDMP-24.5X10.25-15
Black EPDM P Profile Seal – 24.5mm Tail x 10.25mm Bulb – Cut Length
Price shown updates with the option you pick.
This EPDM P profile seal 24.5mm x 10.25mm has a thin 24.5mm flat tail and a 10.25mm hollow bulb, made to form a weather-resistant seal on doors, windows, hatches and enclosures. The thin-walled bulb compresses easily for a tight seal with low closing force. It is sold as one continuous length, from 15m up to a full 30m coil.
At a glance
- 24.5mm flat tail, 1.6mm thick, for adhesive or mechanical fixing
- 10.25mm hollow sealing bulb for easy compression
- Solid EPDM rubber, 65-75 Shore A
- Excellent UV and weathering resistance for door and window seals
- Suitable for interior and exterior use, -40°C to 90°C
- Light at 0.09kg per metre and easy to cut
Typical uses
- Door and window weather seals
- Automotive and transport body seals
- Marine hatches and lockers
- Waterproofing cabinet and enclosure doors
- Impact absorption and decorative trim
Which one do I need?
| P seal size | Best for |
| 19.5mm tail x 7.5mm bulb | Smaller gaps, lighter doors and lids |
| 23.5mm tail x 9mm bulb | Medium gaps, with a thicker 2.5mm tail |
| 24.5mm tail x 10.25mm bulb (this item) | Medium gaps where a soft, thin-walled bulb and low closing force are wanted |
| 26.5mm tail x 11mm bulb | Larger gaps and heavier doors |
As a guide, pick a bulb roughly a quarter larger than the gap it must close, so it compresses without being crushed flat.
Technical drawing
Specification
| Material | Solid EPDM |
| Colour | Black |
| Tail width | 24.5mm |
| Bulb diameter | 10.25mm, hollow |
| Wall thickness | 1.6mm |
| Hardness | 65° – 75° Shore A |
| Temperature range | -40°C to 90°C |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Compression set | 21% (70°C for 22hrs) |
| Weight | 0.09kg per metre |
| Unit of sale | One continuous length, 15m to 30m |
How much do I need?
Measure the full perimeter you need to seal and choose the next length up. Two cabinet doors 1.8m high and 0.9m wide have a perimeter of 5.4m each, so 10.8m in total; the 15m minimum length covers them with spare for trimming. Lengths run in 1m steps up to a full 30m coil.
Fitting tips
- Make sure the mounting surface is clean, dry and free of grease before fitting.
- Fix the flat tail with a suitable rubber adhesive or mechanical fixings.
- Cut with sharp shears or a utility knife for a clean, square end.
- Do not stretch the seal while fitting, as it may shrink back over time.
Complete your project
- EPDM P Profile Seal – 23.5mm Tail x 9mm Bulb – Cut Length
- EPDM P Profile Seal – 26.5mm Tail x 11mm Bulb – Cut Length
- EPDM P Profile Seal – 19.5mm Tail x 7.5mm Bulb – Cut Lengths
Questions
Can this P seal be used outdoors?
Yes. EPDM rubber has excellent resistance to UV and weathering, so it suits exterior doors and windows.
How do I fix this profile in place?
Bond the flat tail with a compatible adhesive, or fix it with screws or rivets through the tail.
Is the bulb solid or hollow?
The 10.25mm bulb is hollow with a thin wall, so it compresses easily when a door or hatch is closed.
What is the longest continuous length?
The longest single length is a full 30m coil.
Need help choosing the right profile? Contact our team for assistance.
Product details
| SKU | IP-EPDMP-24.5X10.25-15 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM P Profile Seal – 24.5mm Tail x 10.25mm Bulb – Cut Length