
Rubber & FoamSKU IP-EPDML-35X10-10
Black EPDM Rubber L Profile – 35mm x 10mm – Roll
Price shown updates with the option you pick.
This black EPDM rubber L profile 35mm x 10mm is an unequal angle trim with a wide 35mm flat leg and a short 10mm upstand, used for edge protection, sealing and finishing on panels, steps, cabinets and vehicle bodies. It is sold by the roll in 10m, 15m or 25m lengths.
At a glance
- Unequal rubber angle trim: 35mm flat leg x 10mm upstand
- Solid EPDM rubber, 5mm upstand and 4mm base thickness
- Excellent resistance to UV, ozone and weathering for outdoor use
- Working temperature -40°C to 120°C
- Cuts cleanly with a sharp knife; fit dry or bond with sealant
- Supplied as a continuous 10m, 15m or 25m roll
Typical uses
- Edge protector for glass, sheet metal and panel edges
- Corner seal and weather strip on doors, hatches and windows
- Finishing trim on caravans, vehicle bodies and rail interiors
- Step and threshold edging to reduce trip hazards
- Closing gaps where dirt and debris would otherwise build up
Which one do I need?
| Profile | Best for |
| 20mm x 10mm, 2mm wall | Light trim on thin sheet and panel edges |
| 35mm x 10mm (this item) | Wide flat leg for covering a ledge or step nosing with a low, tough upstand |
| 50mm x 50mm equal leg | Heavy corner protection on frames and platforms |
| 60mm x 60mm or 100mm x 50mm | Industrial corner guards and dock edges |
Technical drawing
Specification
| Material | EPDM rubber (ethylene propylene diene monomer) |
| Size | 35mm flat leg x 10mm upstand |
| Upstand thickness | 5mm |
| Base thickness | 4mm |
| Colour | Black |
| Hardness | 74 Shore A |
| Temperature range | -40°C to 120°C |
| Tensile strength | 9 MPa |
| Elongation at break | 430% |
| Compression set | 28% (22 h at 70°C) |
| Tolerance class | ISO 3302-1 E2 - L2 |
| Unit of sale | One continuous roll: 10m, 15m or 25m |
How much do I need?
Measure every edge you want to cover and add about 5% for corner cuts and trimming. For example, edging three cabinet tops 2.4m long needs 7.2m, plus 5% = about 7.6m, so a 10m roll covers it with spare. A 25m roll is the better value for longer runs such as step nosings along a walkway.
Fitting tips
- Clean and dry the mounting surface before fitting or bonding.
- Lay the 35mm leg flat and let the 10mm upstand sit against the edge you are protecting.
- Cut with a sharp knife against a straight edge for a square, clean end.
- Where bonding is needed, use a polyurethane or silicone sealant and allow it to cure fully.
- Mitre the corners at 45° for a neat finish on frames and panels.
Complete your project
- Black EPDM Rubber L Profile – 20mm x 10mm – Per Metre
- Black EPDM Rubber L Profile – 60mm x 60mm x 10mm – 3m Length
- Black EPDM Rubber L Profile – 100mm x 50mm x 7mm – 4m Length
Questions
Can this rubber angle trim be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so the profile keeps its flexibility outside.
Which way round does the L profile fit?
The wide 35mm leg normally lies flat on the surface and the 10mm upstand covers or seals the edge.
Does the edge protector need to be glued?
Not always. It can be fitted dry where it is held in place, or bonded with polyurethane or silicone sealant.
Is the roll one continuous length?
Yes, each roll is a single length of 10m, 15m or 25m that you cut to size.
What temperatures can it handle?
From -40°C up to 120°C.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-EPDML-35X10-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM Rubber L Profile – 35mm x 10mm – Roll