
Rubber & FoamSKU IP-EPDMU-14X16-9
Black EPDM Square U Channel – 14mm x 16mm – Cut Length
Price shown updates with the option you pick.
This black EPDM square U channel measures 14mm wide by 16mm high and fits over 10mm thick panels, gripping 14mm of the edge. It is a solid rubber edge protection trim for heavy sheet, board, glass and door edges, sold as one continuous cut length from 9m up to 30m.
At a glance
- Solid black EPDM rubber U channel, 65-75° Shore A
- Fits 10mm thick panels (10mm slot)
- Deep 14mm slot for a secure push-on grip
- 2mm walls give a crisp square edge
- Good resistance to weathering, ozone and temperature change
- Cuts cleanly by hand and pushes on without tools
- One continuous length from 9m to 30m
Typical uses
- Rubber edge protector for 10mm board, sheet and worktop edges
- Cushioning thick glass and polycarbonate panels
- Edge trim for doors, hatches, running boards and stair nosings
- Protective edging on equipment enclosures and vending machines
- Knock protection on machine guards and partitions
Which one do I need?
| Profile (W x H) | Panel thickness | Best for |
| 9.2mm x 10mm | 4.75mm | Low-profile edge on 4.75mm panels |
| 8.75mm x 14mm | 4.75mm | 4.75mm panels needing a deeper 12mm grip |
| 9.2mm x 15mm | 6mm | 6mm panels and board edges |
| 14mm x 16mm (this item) | 10mm | Heavy 10mm panels, doors, worktops and thick glazing |
Technical drawing
Specification
| Material | Solid EPDM |
| Colour | Black |
| Profile size | 14mm wide x 16mm high |
| Slot width x depth | 10mm x 14mm |
| To fit panel thickness | 10mm |
| Wall thickness | 2mm |
| Hardness | 65-75° Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Tear strength | 50 kN/m |
| Weight | 0.12kg per metre |
| Unit of sale | One continuous cut length, 9m to 30m |
How much do I need?
Add up every edge you want to trim and allow about 5% for trimming at joints and corners. For example, four 10mm partition panels each 2m by 1m have a combined perimeter of 24m; with 5% allowance that is about 25.2m, so choose the 26m length. The minimum length is 9m and the channel arrives as one continuous piece.
Fitting tips
- Cut the channel square with sharp shears or a fine-toothed saw.
- Make sure the panel edge is clean, dry and free of grease and burrs.
- Work along the edge from one corner, seating the full 14mm depth; a rubber mallet helps on long runs.
- Cut a small V notch in the base at outside corners so the trim folds neatly.
- For a permanent or watertight fix, bond it with polyurethane or silicone sealant inside the slot.
Complete your project
- EPDM Square U Channel – 8.75mm x 14mm – Cut Length
- EPDM Square U Channel – 12mm x 23mm – Per Metre
- EPDM Square U Channel – 9.2mm x 10mm – Cut to Length
Questions
Can I use this EPDM U channel outdoors?
Yes. EPDM rubber has excellent weathering and ozone resistance, so it suits outdoor panels, doors and enclosures.
Will it fit a 12mm board?
It is sized for 10mm panels. A noticeably thicker panel will stretch the profile and may split it; choose a larger channel for 12mm material.
My panel is 8mm; will it stay on?
It will be loose. Bond it in place with polyurethane or silicone sealant, or choose a channel sized for that thickness.
How do I cut it?
Solid EPDM cuts cleanly with heavy-duty scissors, secateurs or a sharp utility knife.
How is it supplied?
As one continuous length from 9m up to 30m, ready to cut to size on site.
Need help choosing the right edge protection? Contact our team for advice.
Product details
| SKU | IP-EPDMU-14X16-9 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM Square U Channel – 14mm x 16mm – Cut Length