
Rubber & FoamSKU IP-HNBRC-1
Black Nitrile Rubber Cord – 90 Shore A – Per Metre
Price shown updates with the option you pick.
This black 90 Shore A nitrile rubber cord is a hard, solid round section in hydrogenated nitrile (HNBR) for oil- and fuel-resistant sealing. It is sold per metre in diameters from 1mm to 9mm, with a minimum order length that depends on the diameter.
At a glance
- Hard 90 Shore A solid nitrile cord – stiffer than standard 70 Shore A cord
- Hydrogenated nitrile (HNBR) for resistance to petroleum oils, vegetable oils and fuels
- Good resistance to dilute acids and alkalis
- Tensile strength 20.6 MPa, elongation at break 165%
- Working temperature -20°C to +150°C
- 11 diameters, 1mm to 9mm, sold per metre
Typical uses
- Making custom-size O-rings by cutting and bonding the ends
- Groove seals in pumps, gearboxes and hydraulic housings that see oil or fuel
- Automotive and aerospace sealing where a hard, extrusion-resistant cord is needed
- Dust seals and gaskets in machinery
Which one do I need?
| 1mm to 3mm | Fine O-rings and seals for small housings, instruments and covers. |
| 4mm to 6mm | General groove seals and gaskets on pumps, gearboxes and machine covers. |
| 7mm to 9mm | Heavier sections for larger grooves and housings. |
| Need a softer cord? | Choose our nitrile rubber cord 70 Shore A, which compresses more easily into uneven grooves. |
Technical drawing
Specification
| Material | Hydrogenated nitrile rubber (HNBR) |
| Section | Solid round cord |
| Diameters | 1, 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8 and 9mm |
| Colour | Black |
| Hardness | 90 Shore A |
| Tensile strength | 20.6 MPa |
| Elongation at break | 165% |
| Compression set | 21% (22 hours at 150°C) |
| Temperature range | -20°C to +150°C |
| Unit of sale | Per metre (one continuous length) |
How much do I need?
The cord is priced per metre and supplied as one continuous length: enter the number of metres as the quantity. For an O-ring, measure the centre-line circumference of the groove (groove diameter minus one cord diameter, multiplied by 3.14) and add a little for trimming. Example: a 4mm cord for a 200mm groove needs about (200 - 4) x 3.14 = 616mm per ring. Minimum order lengths by diameter:
| Diameter | Minimum order |
| 1mm | 10m |
| 1.5mm | 50m |
| 2mm | 50m |
| 2.5mm | 30m |
| 3mm | 25m |
| 4mm | 25m |
| 5mm | 15m |
| 6mm | 10m |
| 7mm | 10m |
| 8mm | 5m |
| 9mm | 5m |
Fitting tips
- Clean the groove and mating faces and remove old seal residue before fitting.
- Cut the cord square with a sharp blade so the ends meet flush.
- Bond ends with a cyanoacrylate adhesive suited to rubber to make an endless O-ring.
- Do not stretch the cord into the groove – stretching thins the section and reduces the seal.
Complete your project
- Nitrile Rubber Cord – 70 Shore A – Per Metre
- FKM Fluoroelastomer Solid Rubber Cord – 75 Shore A
- EPDM Rubber Cord – Solid Black 70 Shore A
Questions
What does 90 Shore A mean?
It is a hardness reading. 90 Shore A is a hard, stiff rubber that resists being squeezed out of a groove under pressure, compared with the more common 70 Shore A cord.
Is this nitrile cord oil resistant?
Yes. Hydrogenated nitrile resists petroleum oils, vegetable oils and fuels, which is why it is used for O-rings and groove seals in pumps and gearboxes.
Can I make my own O-rings from this rubber cord?
Yes. Cut the cord to length, square the ends and bond them with a cyanoacrylate adhesive suitable for rubber.
Why is there a minimum order length?
Each diameter is cut from a longer production length, so a minimum applies – see the table above.
Need help choosing a diameter? Contact our team.
Product details
| SKU | IP-HNBRC-1 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black Nitrile Rubber Cord – 90 Shore A – Per Metre