
Rubber & FoamSKU IP-PVCDF-63X38-AB75-3
Black PVC D Fender – Plain 63mm x 38mm Profile – Single Length
Price shown updates with the option you pick.
This black PVC D fender 63mm x 38mm is a heavy-duty, non-marking impact bumper designed for small boats, pontoons, and loading bays. This plain hollow profile is supplied without a fixing lip, allowing for direct bolting or channel mounting, and is sold per single 3m or 6m length.
At a glance
- 63mm wide x 38mm high hollow D profile
- Plain base design without a fixing lip
- 8mm thick wall for high impact absorption
- Non-marking, UV-stabilised black PVC
- Operating temperature range of -40°C to 60°C
- 100% recyclable and phthalate-free
Typical uses
- Rubbing strakes for small boats and marine vessels
- Edge protection for marina jetties and pontoons
- Impact barriers for lorry and truck loading bays
- Wall protection in industrial warehouses
Technical drawing
Specification
| Material | Polyvinyl chloride (PVC) |
| Profile type | Hollow D (plain, no lip) |
| Width | 63mm |
| Height | 38mm |
| Wall thickness | 8mm |
| Hardness | 67° Shore A |
| Weight | 1.85kg per metre |
| Operating temperature | -40°C to 60°C |
| Colour | Black |
Installation and care
This plain D fender can be installed by bolting it directly onto a flat surface or sliding it into a custom retaining channel. The PVC material is easy to drill, chamfer, or cut to exact lengths on site using standard hand tools. Because it is non-marking, it will not transfer black smears onto boat hulls or vehicle bodywork during an impact.
Fitting tips
- Use a flat steel retaining strip inside the hollow bore if bolting directly, to spread the load and prevent the bolt heads from pulling through the PVC.
- Pre-drill your fixing holes before attempting to mount the fender to ensure accurate alignment.
- Allow the PVC to warm slightly in ambient temperatures before fitting, as it becomes more flexible and easier to handle.
- Ensure the mounting surface is clean, flat, and structurally sound enough to take the transferred impact force.
Complete your project
- PVC Mat Edging Strip – For 14mm Thick Matting – 10.1m Roll
- Rubber Cable Protector – 98mm x 13mm – 1m to 9m Lengths
- Rubber Cable Protector – 88mm x 17mm – Single Length
Data sheet
Download the technical data sheet (PDF)
Questions
Does this fender have a fixing lip?
No, this is the plain 63mm x 38mm profile without the 9mm fixing lip. It is designed for direct bolting through the centre or for use in a channel.
Will this leave black marks on my boat?
No, the PVC compound used is specifically formulated to be non-marking, preventing smears on hulls and adjacent vessels.
Can I bend this around a pontoon corner?
Yes, the 67° Shore A hardness allows for some flexibility, but tight radiuses may require the fender to be pre-curved or mitre-cut.
How heavy is the fender?
It weighs 1.85kg per metre, making a 3m length approximately 5.55kg and a 6m length 11.1kg.
Need further assistance? Contact our team for help.
Product details
| SKU | IP-PVCDF-63X38-AB75-3 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black PVC D Fender – Plain 63mm x 38mm Profile – Single Length