
Rubber & FoamSKU IP-PME-14-6-BLACK
PVC Mat Edging Strip – For 14mm Thick Matting – 10.1m Roll
Price shown updates with the option you pick.
This PVC mat edging strip is made for 14mm thick matting: bonded along an exposed mat edge, it forms a gentle ramp from the floor up to the mat surface so people, trolleys and pallet trucks do not catch the edge. It is sold as one continuous 10.1m roll, 6cm or 10cm wide, in black, grey or yellow.
At a glance
- Ramp edging sized for 14mm thick matting
- 6cm wide for foot traffic or 10cm wide for a shallower slope
- Flexible PVC with a textured top and ribbed underside
- Yellow for a high-visibility edge, black or grey to blend in
- Bonds to the mat edge with PVC cold weld adhesive
- One continuous 10.1m roll per order line
Typical uses
- Trip-free ramp borders on 14mm roof walkway matting
- Edging loose-lay walkway and wet-area matting in factories
- Finishing anti-slip mats along assembly lines and workbenches
- Marking mat edges at entrances and transition zones with yellow edging
Which one do I need?
| Pedestrian walkways | 6cm wide PVC mat edging strip 14mm |
| Trolleys, wheelchairs, pallet trucks | 10cm wide, for a longer, shallower ramp |
| Edge must be seen | Yellow, in either width |
| Matting 10mm thick | Use a 10mm low-profile edging instead; this strip leaves a step on thinner mats |
Technical drawing
Specification
| Suits mat thickness | 14mm |
| Widths | 6cm, 10cm |
| Material | Flexible PVC |
| Colours | Black, grey, yellow |
| Roll length | 10.1m, one continuous piece |
| Fixing | PVC cold weld adhesive (not supplied), about one 132g tube per roll |
How much do I need?
Add up the exposed edges of the matting. Example: a roof walkway run 18m long, 1m wide, with both long sides and one end exposed, needs 18 + 18 + 1 = 37m of edging. 37 ÷ 10.1 = 3.7, so order four rolls. Edges that butt a wall or kerb do not need edging.
Fitting tips
- Cut the mat edge straight and clean it so the edging seats along its full length.
- Run a continuous bead of PVC cold weld adhesive along the joint, roughly one 132g tube per roll.
- Press the strip firmly against the mat and wipe off excess adhesive straight away.
- Mitre corners at 45 degrees with a sharp knife for a neat, trip-free turn.
- Let the adhesive cure fully before allowing traffic.
Complete your project
- Roof & Wet Area Walkway Matting – 14mm Open-Lattice PVC
- Heavy-Duty Roof Walkway Matting – 14mm Loose-Lay PVC
- Matting Accessories – Ramp Edging, Snap Track, Clips & Floor Hooks
Questions
Will this PVC mat edging strip fit 10mm or 19mm mats?
No. It is sized for 14mm matting; on other thicknesses it leaves a step, which defeats the point of the ramp.
Which width should I choose?
6cm suits foot traffic. 10cm gives a shallower slope for wheels such as trolleys, wheelchairs and pallet trucks.
How is it fixed?
With PVC cold weld adhesive along the joint between mat and edging. The adhesive is not included.
Can it be used outdoors?
Yes. Flexible PVC suits roof walkways and outdoor matting as well as indoor floors.
Is the roll one piece?
Yes, each roll is one continuous 10.1m length that you cut to size on site.
Need help matching edging to your matting? Contact our team.
Product details
| SKU | IP-PME-14-6-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:PVC Mat Edging Strip – For 14mm Thick Matting – 10.1m Roll