
Rubber & FoamSKU IP-WHS-60X40-STD
Composite EPDM Watertight Hatch Seal – 60mm x 40mm – 10m Coil
This watertight hatch seal 60mm x 40mm is a heavy-section composite marine seal for cargo hatch covers and weathertight doors: a tough solid EPDM skin forms an open channel that holds a soft, highly compressible sponge core, so the hatch closes onto the sponge and seals with low force. It is sold as one continuous 10m coil.
At a glance
- Hatch seal 60mm wide x 40mm high, one of the largest sections in our range
- Composite marine door seal: solid EPDM skin with an open-cell natural rubber sponge core
- Sponge sealing face exposed along the top for easy compression
- Chamfered skin corners help the seal sit firmly in its channel
- Heavy 2.2 kg per metre section for large steel hatches
- Operating range -30°C to +70°C
Typical uses
- Cargo hatch covers and access doors on commercial vessels
- Weathertight doors on ships and offshore units
- Marine skylights and deck access hatches
- Ullage plugs and inspection covers
- Replacement seals for large hatches with a deep retaining channel
Which one do I need?
| Seal size | Best for |
|---|---|
| 50mm x 30mm | Medium hatches and doors with a 50mm channel |
| 57mm x 32mm | Larger hatches needing a wider seal face but a shallow channel |
| 60mm x 40mm (this seal) | Large cargo covers and heavy doors with a deep 60mm channel and a large closing gap |
| 70mm x 40mm | The widest channels and heaviest hatch covers |
Technical drawing
Specification
| Profile | Open U-section skin with exposed sponge sealing face, chamfered corners |
| Size | 60mm wide x 40mm high |
| Outer skin | Solid EPDM rubber, 67° Shore A |
| Core | Open-cell natural rubber (NR) sponge, 76° Shore OO |
| Skin tensile strength | 7.2 MPa |
| Sponge tensile strength | 2.4 MPa |
| Skin elongation at break | 305% |
| Sponge elongation at break | 800% |
| Operating temperature | -30°C to +70°C |
| Weight | 2.2 kg per metre |
| Colour | Black |
| Unit of sale | One 10m coil |
How much do I need?
Measure the full perimeter of the hatch channel and add about 10% for trimming and the joint. Example: a 2m x 1.5m cargo hatch has a perimeter of 2 x (2 + 1.5) = 7m; with 10% that is 7.7m, so one 10m coil seals it with an offcut to spare. A hatch larger than about 2.6m x 1.9m needs two coils.
Fitting tips
- Clean the retaining channel of rust, old seal and adhesive before fitting.
- Fit the seal with the exposed sponge face towards the coaming or knife edge.
- Press the seal into the channel without stretching it, or it will shrink back and open gaps at the corners.
- Cut ends square with a sharp blade and bond the butt joint with a marine-grade rubber adhesive, placing the joint away from a corner.
- Close and dog the hatch, then check for an even impression along the sponge face.
Complete your project
- Watertight Hatch Seal – 50mm x 30mm – 10m or 20m Strip
- Watertight Hatch Seal – 57mm x 32mm – 10m Length
- Watertight Hatch Seal – 70mm x 40mm – 10m Length
Questions
What channel does the 60mm x 40mm hatch seal fit?
It is 60mm wide and 40mm high, so it suits retaining channels about 60mm wide. Measure your old seal or the channel before ordering.
Why is the sponge core exposed on top?
The open sponge face meets the coaming first and compresses easily, so heavy hatches seal with less closing force, while the solid EPDM skin holds the seal in the channel and protects its sides.
Is this marine door seal suitable outdoors?
Yes. The EPDM skin resists weathering, UV and ozone. Note the working range of -30°C to +70°C.
Can I buy less than 10m?
This seal is supplied in complete 10m coils.
How do I join the ends?
Cut both ends square and bond them with a suitable marine-grade rubber adhesive to make a continuous seal.
Need help matching a hatch seal to your channel? Contact our team with the channel width and closing gap and we will recommend the right size.
Product details
| SKU | IP-WHS-60X40-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Composite EPDM Watertight Hatch Seal – 60mm x 40mm – 10m Coil