
Rubber & FoamSKU IP-TDC-60X55
Corner D Fender, Black Hollow TPE, 60mm x 55mm Profile, Pre-Drilled
This corner D fender 60mm x 55mm is a hollow black TPE corner piece that protects the 90° corners of pontoons, platforms and loading bays. Two mitred arms of 60mm wide x 55mm high hollow D profile are vulcanised into a 155mm x 155mm corner, sold individually and pre-drilled for fixing.
At a glance
- Pre-mitred, vulcanised 90° corner – 155mm x 155mm
- Hollow D profile 60mm x 55mm compresses to absorb impact
- Pre-drilled: 20mm access holes in the top face, 9mm fixing holes in the base
- Non-marking black TPE, 68° Shore A
- Good resistance to weathering and UV
- Works from -40°C to 90°C, indoors or out
Typical uses
- Pontoon and jetty corners
- Corners of loading bays and dock levellers
- Marina and harbour edge protection
- Buffering corners of industrial platforms and equipment
- Warehouse and retail impact zones
Which one do I need?
| Item | Use it for |
|---|---|
| Corner D fender 60mm x 55mm (this item) | Turning a 90° outside corner with a hollow D fender |
| Hollow TPE delta D fender 60mm x 52mm, 10m coil | Long straight runs of similar size |
| Hollow TPE delta D fender 80mm x 70mm, 10m coil | Heavier straight runs |
Technical drawing
Specification
| Material | Thermoplastic elastomer (TPE), non-marking |
| Colour | Black |
| Profile size | 60mm wide x 55mm high, hollow |
| Joined corner size | 155mm x 155mm, 90° |
| Top face holes | 20mm diameter |
| Base fixing holes | 9mm diameter |
| Hardness | 68° Shore A |
| Tensile strength | 7.8 MPa |
| Density | 1.09 g/cm³ |
| Operating temperature | -40°C to 90°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | Each |
Installation and care
Offer the corner up to the structure, mark through the 9mm base holes, drill and bolt it down using the 20mm top-face holes for socket access. The hollow chamber lets the fender squash and recover without tearing. Clean with water and a mild detergent.
Fitting tips
- Fit the corner first, then butt straight fender lengths up to each arm.
- Use stainless steel bolts and washers outdoors or near salt water.
- Tighten until the base sits flat – do not crush the hollow chamber.
- Check the mounting face is flat and sound before drilling.
Complete your project
- Hollow TPE Delta D Fender – 60mm x 52mm Profile – 10m Coil
- Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil
- TPE Delta D Fender – 110mm x 95mm – 2 x 5m Pack
Questions
Is this corner fender suitable for outdoor use?
Yes. The TPE compound resists weathering and UV, so it suits marinas, pontoons and external loading bays.
Will it mark boats or vehicles?
No. The black TPE compound is non-marking.
How is the corner joined?
The two mitred arms are vulcanised together into one piece, so there is no glued joint to fail.
What fixings do I need?
Bolts or heavy-duty screws through the 9mm base holes, chosen to suit your structure; the 20mm top holes give tool access.
How many do I need?
One for each outside corner you want to protect.
Need help planning fendering? Contact our team.
Product details
| SKU | IP-TDC-60X55 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Corner D Fender, Black Hollow TPE, 60mm x 55mm Profile, Pre-Drilled