
Rubber & FoamSKU IP-TPEF-80X70-BLACK
Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil
Price shown updates with the option you pick.
This hollow TPE delta D fender, 80mm x 70mm, is a triangular-section rubbing strip for pontoons, jetties, workboats and loading bays, sold as a 10m coil in black or grey. The wide flat back fixes against the structure while the hollow peak flexes on impact and spreads the load into the base.
At a glance
- Delta D fender profile: 80mm across the flat back, 70mm deep from back to peak
- Hollow core gives a softer, more forgiving bump than a solid fender of the same size
- Thermoplastic elastomer (TPE), 68 Shore A, non-marking on boat hulls and painted vehicles
- Good UV, weather, abrasion and tear resistance for permanent outdoor fitting
- Works from -40°C to +90°C
- Black or grey, one continuous 10m coil, 100% recyclable material
Typical uses
- Edge protection along marina pontoons, jetties and landing stages
- Rubbing strip on workboats, ribs and harbour craft
- Impact strip on lorry loading bays, dock edges and goods-in doors
- Bumper strip for walls and columns in busy industrial areas
Which one do I need?
| Delta D fender size | Best for |
|---|---|
| 60mm x 52mm | Small boats, tenders and light-duty pontoon fingers |
| 80mm x 70mm (this product) | General marina pontoons, workboats up to medium size and loading bay edges |
| 110mm x 95mm | Larger vessels and heavier quay or dock impacts |
| 150mm x 130mm | Commercial berths and heavy dock protection |
Technical drawing
Specification
| Profile | Hollow delta D (triangular) fender with flat fixing back |
| Size | 80mm wide x 70mm deep |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 68 Shore A |
| Density | 1.09 g/cm³ |
| Tensile strength | 7.8 MPa |
| Elongation at break | 700% |
| Operating temperature | -40°C to +90°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Colours | Black, grey |
| Unit of sale | One 10m coil |
How much do I need?
Measure every edge you want to protect and add about 5% for trimming at the ends and corners. Example: a 12m pontoon with one 6m finger needs 18m, plus 5% = 18.9m, so order two 10m coils of the 80mm x 70mm fender.
Fitting tips
- Fix through the flat back with stainless screws and penny washers at roughly 250-300mm centres, closer at the ends.
- Let the coil relax in the sun or a warm room before fitting so it lies straight.
- Cut cleanly with a sharp knife or fine saw; mitre the ends at corners for a neat finish.
- Do not over-tighten fixings: the hollow peak must stay free to flex.
Complete your project
- Hollow TPE Delta D Fender – 60mm x 52mm – 10m Coil
- Compact TPE D Fender – 50mm x 30mm – 25m Coil
- TPE B Fender – Solid 80mm x 40mm – 25m Coil
Questions
What is a delta D fender?
It is a fender with a triangular, D-like cross-section: a wide flat back that fixes to the structure and a narrower peak that takes the knocks. The hollow centre lets the peak squash and recover, which cushions impacts better than a flat rubbing strip.
Will the 80mm x 70mm fender mark my boat?
No. The TPE compound is non-marking, so it will not leave black streaks on gelcoat or paintwork.
Can it stay outside all year?
Yes. TPE resists UV, weather and salt spray and stays flexible from -40°C up to +90°C.
Should I choose 80mm x 70mm or a smaller size?
Choose 80mm x 70mm for general pontoons, workboats and loading bays. The 60mm x 52mm size suits small craft and light duty; the larger sizes suit heavier vessels and commercial berths.
Need help choosing a fender? Contact our team and we will be glad to help.
Product details
| SKU | IP-TPEF-80X70-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow TPE Delta D Fender – 80mm x 70mm – 10m Coil