
Rubber & FoamSKU IP-EPDML-9.5X5X2-STD
EPDM L Profile Angle Trim – 9.5mm x 5mm x 2mm Wall – Per Metre
This EPDM L profile 9.5mm x 5mm is a small black rubber angle trim with a 9.5mm flat leg, a 5mm upstand and a 2mm solid wall. It caps and protects exposed edges on sheet metal, glass and panels and closes small gaps against dirt and draughts. Sold per metre, minimum 12m, up to a 30m continuous coil.
At a glance
- Unequal L section: 9.5mm flat leg, 5mm upstand
- 2mm solid EPDM wall, black
- 75 Shore A: firm enough to hold its angle, flexible enough to follow gentle curves
- Weather resistant rubber angle trim for indoor and outdoor edges
- Light at about 0.03kg per metre
- Cut lengths from 12m up to a 30m coil
Typical uses
- Edge protector for sheet metal panels and cabinet tops
- Rubber corner trim on glass and acrylic edges
- Finishing strip on vehicle, caravan and trailer body edges
- Gap seal against dust and debris along panel joints
- Neat trim over low steps and raised edges
Which one do I need?
| EPDM L profile | Legs | Best for |
|---|---|---|
| 9.5mm x 5mm (this one) | 9.5mm flat, 5mm upstand, 2mm wall | Thin sheet and glass edges, light trim work |
| 15.5mm x 16.5mm | Near-equal legs | Thicker panels and corners that need more cover |
| 38mm x 38mm | Equal legs, 6mm wall | Heavy-duty corner and edge protection |
Technical drawing
Specification
| Material | EPDM rubber |
| Profile | Unequal L (angle) |
| Flat leg | 9.5mm |
| Upstand | 5mm |
| Wall thickness | 2mm |
| Hardness | 75 Shore A |
| Weight | Approx. 0.03kg per metre |
| Colour | Black |
| Unit of sale | Per metre, minimum 12m |
| Longest continuous length | 30m coil |
How much do I need?
Add up every edge you want to trim and allow about 5% for mitres and trimming. Example: edging the top front and two side edges of three cabinets that are each 900mm wide and 450mm deep needs 3 x (0.9 + 0.45 + 0.45) = 5.4m, so the 12m minimum covers six such cabinets with spare. Lengths up to 30m come in one piece.
Fitting tips
- Clean and degrease the edge first, then bond both legs with a polyurethane or silicone sealant or a contact adhesive suited to EPDM.
- Fit the 9.5mm leg on the larger face and the 5mm upstand over the exposed edge.
- Mitre the trim at 45 degrees on sharp corners rather than forcing it round.
- Cut with sharp shears or a fresh knife blade for square, tight joints.
Complete your project
- EPDM L Profile Angle Trim – 15.5mm x 16.5mm – Per Metre
- EPDM Self-Grip Edge Trim – 14.8mm x 14.9mm – Per Metre
- EPDM D Section Door Seal – 18mm x 13.75mm – Per Metre
Questions
Can this rubber angle trim be used outdoors?
Yes. EPDM is chosen for outdoor trim because it resists weather, UV and ozone well.
Are the two legs the same length?
No. It is an unequal L: the flat leg is 9.5mm and the upstand is 5mm, both 2mm thick.
How do I fix the edge protector in place?
Bond it with a polyurethane or silicone sealant or an EPDM-compatible contact adhesive. It is not a push-on clip trim.
What is the minimum I can order?
12 metres. Longer lengths are supplied in one continuous piece up to 30m.
Will it go round corners?
It follows gentle curves; for square corners, mitre the ends at 45 degrees.
Need help choosing an edge trim? Contact our team for advice.
Product details
| SKU | IP-EPDML-9.5X5X2-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM L Profile Angle Trim – 9.5mm x 5mm x 2mm Wall – Per Metre