
Rubber & FoamSKU IP-SGDS-15.5X10X1-STD
EPDM Self-Grip Door Seal – 15.5mm x 10mm for 1mm to 2mm Panels – Per Metre
This EPDM self-grip door seal, 15.5mm x 10mm, gives a durable, watertight closure on enclosures, cabinets and vehicle hatches. It push-fits onto metal or plastic edges between 1mm and 2mm thick, needs no adhesive, and is sold per metre so you buy exactly the length you need.
At a glance
- Push-fit edge seal for 1mm to 2mm panel thicknesses
- 15.5mm high x 10mm wide overall profile
- Solid EPDM grip channel with an embedded steel carrier for strong retention
- Flexible EPDM sponge sealing bulb
- Weather resistant rubber edge trim for indoor or outdoor use
- Sold per metre, supplied as one continuous length up to 60m
Typical uses
- Sealing machine guards, control cabinets and electrical enclosures
- Weatherproofing vehicle doors, hatches and side panels
- Marine lockers and outdoor equipment boxes
- Edge protection over sharp sheet metal edges
Which one do I need?
| Panel or flange thickness | Choose |
| 1mm to 2mm (light sheet metal, thin plastic doors) | This 15.5mm x 10mm self-grip door seal |
| 1.6mm to 3mm (heavier cabinet doors, hatches) | 17mm x 10mm self-grip door seal |
Measure the edge thickness with a rule or calipers first: a grip channel that is too wide for the panel will not hold, and one that is too narrow will not push fully home.
Technical drawing
Specification
| Material | Solid and sponge EPDM with steel carrier |
| Overall size | 15.5mm x 10mm |
| To fit panel thickness | 1mm to 2mm |
| Colour | Black |
| Hardness | 67° to 82° Shore A |
| Operating temperature | -40°C to +80°C |
| Maximum compression | 40% |
| Unit of sale | Per metre (quantity = metres), one continuous length up to 60m |
How much do I need?
This seal is sold per metre. To seal a hatch measuring 1.2m by 0.8m, add up the perimeter: 1.2 + 0.8 + 1.2 + 0.8 = 4m, so order 4 metres. Add a little for trimming at the joint. Lengths up to 60m are supplied as one continuous piece.
Fitting tips
- Clean the panel edge so it is free from grease and debris before fitting.
- Push the seal firmly onto the edge by hand; a rubber mallet helps on tight corners.
- Aim for 30% to 40% compression of the sponge bulb when the door is closed; more than 50% can permanently flatten it.
- Cut to length with heavy-duty snips, cutting cleanly through the steel carrier.
Complete your project
- EPDM Self-Grip Door Seal – 17mm x 10mm – Per Metre
- Silicone T Seal Profile – 4mm x 6.5mm – 25m Coil
- Silicone L Profile – 4.5mm x 3.7mm – 25m Coil
Questions
Do I need adhesive to fit this self-grip door seal?
No. The steel carrier inside the grip channel holds the seal firmly on the panel edge without glue.
Can it bend around corners?
Yes. The EPDM rubber and flexible carrier follow radiused corners; cut and butt-join at sharp 90° corners for the neatest finish.
Is this rubber edge trim suitable for outdoor use?
Yes. EPDM resists weathering, UV and temperature swings, so it suits exterior cabinets and vehicle hatches.
What if my panel is thicker than 2mm?
Choose the 17mm x 10mm self-grip door seal, which fits panels from 1.6mm to 3mm.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-SGDS-15.5X10X1-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Door Seal – 15.5mm x 10mm for 1mm to 2mm Panels – Per Metre