Rubber & FoamSKU IP-SILP-4.5X3.7-BLACK
Silicone L Profile – 4.5mm x 3.7mm – 25m Coil
This silicone L profile 4.5mm x 3.7mm is a miniature, firm angle trim for finishing and protecting thin edges on instrument panels, small enclosures, glass and light sheet metal. It is sold as a 25m coil and comes in seven colours.
At a glance
- Miniature rubber angle trim: 4.5mm wide x 3.7mm high
- Solid section – 1.4mm base and 2.4mm-wide upright
- Firm 80 Shore A silicone holds a crisp edge line
- Working range -50°C to +180°C
- Food-contact compliant, WRAS-approved silicone compound
- Resists UV, ozone, weathering and radiation
- Seven colours, one colour per 25m coil
Typical uses
- Edge finishing on instrument cases and small control panels
- Corner protection on thin glass and acrylic sheets
- Small seals on inspection covers and enclosure lids
- Trim on food and drink processing equipment and laboratory fittings
- Heat-resistant edge strip on light equipment covers
Which one do I need?
| Profile | Best for |
|---|---|
| 3mm x 1mm | The finest edges, where only a very thin trim will fit |
| 4.5mm x 3.7mm (this item) | Small, firm trim with a solid section on thin panels |
| 5mm x 3mm, 40 Shore A | A softer, more flexible trim of similar size |
| 6.2mm x 5.2mm | Slightly larger edges that need more cover |
Technical drawing
![]()
Specification
| Property | Value | Test method |
|---|---|---|
| Product | Silicone L profile (angle trim) | – |
| Width | 4.5mm | – |
| Height | 3.7mm | – |
| Section thickness | 1.4mm base, 2.4mm upright | – |
| Dimensional tolerance | ISO 3302-1:2014, Class E2 | – |
| Material | Solid silicone rubber | – |
| Hardness | 80° Shore A | DIN ISO 48-4 |
| Density | 1.20 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 10 N/mm² | ISO 37 Type 1 |
| Elongation at break | 440% | ISO 37 Type 1 |
| Tear strength | 28 N/mm | ASTM D 624 B |
| Compression set (22 hours at 175°C) | 78% | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 54% | ISO 4662 |
| Working temperature | -50°C to +180°C | – |
| Colours | Black, blue, green, red, translucent, white, yellow | – |
| Unit of sale | One continuous 25m coil | – |
Material and compliance
Every claim below is taken from the manufacturer's technical data for this exact profile.
- Food contact: the compound complies with FDA 21 CFR 177.2600 and EC 1935/2004, so it can be used on food and drink processing and handling equipment.
- Drinking water: made from a WRAS-approved material, suitable for potable water and public water supply applications.
- Clean composition: free from TSE/BSE-derived by-products and free from phthalates.
- Environmental resistance: resists ozone, UV, oxidation, weathering, cosmic and ionising radiation, and corona discharge.
For a copy of the compliance documents for your order, contact our team.
How much do I need?
Total the length of every edge and add 5% for trimming. Example: 20 instrument panels, each with a 500mm and a 300mm edge to finish, need 20 x 0.8m = 16m, plus 5% = about 16.8m – one 25m coil.
Fitting tips
- Clean and degrease the edge before fitting.
- Use a thin bead of silicone adhesive inside the angle; small sections need very little.
- Cut with a fresh, sharp blade so the small section stays square.
- Fit the strip without stretching it, so it does not pull back as the adhesive cures.
Complete your project
- Silicone L Profile – 3mm x 1mm – 25m Coil
- Silicone L Profile – 5mm x 3mm, Soft 40 Shore A – 25m Coil
- Silicone L Profile – 6.2mm x 5.2mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this miniature angle trim food safe?
Yes. The compound complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and is free from TSE/BSE-derived by-products and phthalates.
Can I use it on drinking water equipment?
Yes. It is made from a WRAS-approved material for potable water use.
Will it spring back after being squashed?
It is a firm trim rather than a soft compression seal. Rebound resilience is 54%, and compression set is 78% after 22 hours at 175°C. For gaps that are squeezed shut, choose a softer seal such as the 40 Shore A L profile.
Why choose 80 Shore A?
The firmer compound keeps a straight, crisp line on small edges and resists being pushed out of shape.
Can it be used outdoors?
Yes. Silicone resists UV, ozone, oxidation and weathering, so it holds up on exposed edges.
How accurate is the size?
The profile is extruded to ISO 3302-1:2014 tolerance class E2, the international standard for dimensional tolerances on extruded rubber profiles.
How is it supplied?
As one continuous 25m coil in the colour you choose.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-4.5X3.7-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 4.5mm x 3.7mm – 25m Coil