
Rubber & FoamSKU IP-RCDS-25.1X15.5-STD
EPDM Self-Grip Door Seal – 25.1mm x 15.5mm – Per Metre
This black EPDM self-grip door seal measures 25.1mm x 15.5mm and is designed to push securely onto panel edges between 1.6mm and 3mm thick. Manufactured with a steel wire carrier embedded within the solid EPDM channel, it features an attached sponge EPDM sealing bulb. It is sold cut to length per metre (minimum order 7m) or in full 50m coils.
At a glance
- Profile size: 25.1mm wide x 15.5mm high
- Clamping range: fits 1.6mm to 3mm panel edges
- Material: solid and sponge EPDM rubber
- Internal structure: steel wire carrier for shape retention
- Installation: push-fit self-gripping channel, no adhesive required
- Operating temperature: -40°C to 80°C
Typical uses
- Sealing doors and hatches on commercial vehicles, buses and trains
- Weatherproofing marine equipment and enclosures
- Finishing and sealing interior side panels
- Protecting edges on metal furniture and safety equipment
- Replacing worn seals on classic and vintage vehicles
Technical drawing
Specification
| Material | Solid and sponge EPDM with metal insert |
| Colour | Black |
| Profile dimensions | 25.1mm x 15.5mm |
| Panel thickness range | 1.6mm to 3mm |
| Hardness | 67° to 82° Shore A |
| Temperature range | -40°C to 80°C |
| Maximum compression | 40% (sponge section) |
How much do I need?
This seal is sold per metre. To calculate your requirement, measure the total perimeter of the aperture or door edge you need to seal. For example, a cabinet door measuring 1m high by 0.5m wide has a perimeter of 3m. We recommend adding 5-10% to your total to allow for trimming and corner radii. Please note the minimum order quantity is 7m.
Fitting tips
- Ensure the panel edge is clean, dry and free from sharp burrs before fitting.
- Push the U-channel firmly over the edge; the internal steel carrier and rubber lips will grip the panel without adhesive.
- Do not stretch the seal as you apply it, as it will shrink back over time and leave a gap at the join.
- Cut the seal to size using sharp secateurs or heavy-duty snips to cleanly sever the steel wire carrier.
- For optimal performance and recovery, ensure the sponge bulb is compressed by no more than 40% when the door or hatch is closed.
Complete your project
- Low Profile Cable Protector – 83mm x 14mm NR/SBR – Per Length
- EPDM Self-Grip Door Seal – 25.5mm x 14.5mm for 6mm Panels – Per Metre
- EPDM Square U Channel – 9.5mm x 19mm – Cut Length
Data sheet
Download the technical data sheet (PDF)
Questions
Can I bend this seal around tight corners?
Yes, the flexible EPDM and segmented steel carrier allow the seal to bend around corners and complex angles. Very tight radii may require a small notch in the channel section to prevent the bulb from distorting.
Do I need to glue this seal in place?
No, the self-gripping U-channel is designed to hold securely onto the panel edge using its own natural gripping force and the internal steel wire carrier.
How do I cut this seal?
Because of the internal steel wire carrier, you will need sharp, heavy-duty snips or shears to cut the seal cleanly to your required length.
What happens if the sponge bulb is over-compressed?
Compressing the sponge section beyond the recommended 40% maximum can cause permanent deformation (compression set). This means the rubber will not fully recover its original shape, reducing its elasticity and sealing effectiveness over time.
Need further assistance? Contact our team for help.
Product details
| SKU | IP-RCDS-25.1X15.5-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Door Seal – 25.1mm x 15.5mm – Per Metre