
Rubber & FoamSKU IP-IPSTS-44.5X1.6X3-26
EPDM Self-Grip Top Seal – 44.5mm High, Fits 1.6mm-3mm Panels – 9m to 30m Lengths
Price shown updates with the option you pick.
This EPDM self-grip top seal stands 44.5mm high and push-fits onto panel edges 1.6mm to 3mm thick, sealing hatches, enclosure doors and machine guards while covering sharp edges. Choose the length you need: each option is one continuous piece from 9m to 30m.
At a glance
- 44.5mm overall height with a tall flexible sealing lip
- Grips panels from 1.6mm to 3mm thick
- Embedded steel carrier - fits without adhesive
- Weather and UV resistant EPDM rubber
- Sold as one continuous length, 9m to 30m in 1m steps
Typical uses
- Sealing tops of hatches, lids and enclosure doors
- Weatherproofing vehicle and trailer body panels
- Closing gaps on industrial machine guards
- Protecting sharp sheet metal edges on cabinets and housings
Which one do I need?
| Total edge to seal | Length to choose |
| Up to about 8.5m (small hatches, one or two doors) | 9m |
| 9m to 29m | The next whole metre above your measurement |
| More than 29.5m | 30m plus a second length for the remainder |
Each length is supplied as a single piece, so one length can run round a whole opening with only one joint. Check your panel is 1.6mm to 3mm thick before ordering.
Technical drawing
Specification
| Material | EPDM rubber with steel carrier |
| Colour | Black |
| Overall height | 44.5mm |
| Grip channel | 11mm deep |
| Panel thickness range | 1.6mm to 3mm |
| Hardness | 67° to 82° Shore A |
| Operating temperature | -40°C to +80°C |
| Maximum compression | 40% |
| Unit of sale | One continuous length; choose 9m to 30m |
How much do I need?
Add up every edge the top seal will run along. A hatch of 1.5m x 1m has a perimeter of 1.5 + 1 + 1.5 + 1 = 5m, so the 9m length covers it with spare for a second small hatch. Two enclosure doors of 2m x 1m need 2 x 6m = 12m, so choose the 12m or 13m length.
Fitting tips
- Press the grip channel onto the panel edge by hand, working along from one end; a rubber mallet helps on tight spots.
- No adhesive is needed - the steel carrier holds it.
- Set the closed gap so the lip compresses no more than 40%.
- Cut with heavy-duty snips, cutting cleanly through the carrier.
Complete your project
- EPDM Self-Grip Door Seal – 17mm x 10mm – Per Metre
- Self-Grip Door Seal – 11.5mm x 20mm for 3mm to 6mm Panels
- EPDM Self-Grip Door Seal – 15.5mm x 10mm for 1mm to 2mm Panels
Questions
Can this EPDM top seal be used outdoors?
Yes. EPDM resists weathering, UV and moisture, so it suits exterior hatches and vehicle panels.
Will it bend around corners?
Yes, it follows radiused corners; for sharp 90° corners cut and butt-join for the neatest seal.
Do I need glue to fit it?
No. The steel carrier in the grip channel holds it firmly on 1.6mm to 3mm panels.
Is it sold per metre?
No. Each option is one continuous length, from 9m to 30m, at the price shown for that length.
What if I compress it too much?
Beyond 40% the rubber can take a permanent set and stop sealing; adjust the gap if needed.
Need help choosing the right profile? Contact our team for advice.
Product details
| SKU | IP-IPSTS-44.5X1.6X3-26 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Self-Grip Top Seal – 44.5mm High, Fits 1.6mm-3mm Panels – 9m to 30m Lengths