
Rubber & FoamSKU IP-EPDMS-12.5X12.5-STD
EPDM Sponge D Section – Self-Adhesive 12.5mm x 12.5mm – 25m Coil
This self-adhesive EPDM sponge D section measures 12.5mm wide by 12.5mm high and is supplied as a 25m coil. Designed with a hollow centre, this flexible rubber profile compresses easily to form a reliable airtight and watertight seal against uneven surfaces.
Manufactured from expanded EPDM sponge, it provides excellent resistance to UV, weathering, ozone and temperature fluctuations, making it suitable for both interior and exterior applications. The built-in self-adhesive backing ensures quick and straightforward installation, while the 6.2mm inner hole can also be used to route and protect small cables or wires.
At a glance
- 12.5mm x 12.5mm hollow D-shaped profile
- Supplied as a continuous 25m coil
- Self-adhesive backing for easy installation
- Manufactured from expanded EPDM sponge
- Excellent resistance to UV, weathering and ozone
- Compresses easily to seal uneven gaps
Typical uses
- Automotive and marine door or hatch seals
- Weather stripping and glazing seals
- Industrial enclosure and cabinet sealing
- Impact protection and aesthetic edging
- Routing and protecting small cables
Technical drawing
Specification
| Material | Expanded EPDM sponge |
| Profile shape | Hollow D section |
| Width | 12.5mm |
| Height | 12.5mm |
| Inner hole diameter | 6.2mm |
| Hardness | 40° (Shore OO) |
| Density range | 0.5 – 0.9g/cm³ |
| Water absorption | 5% (max) |
| Compression set (22 hours) | 50% |
| Weight | 0.09kg per metre |
| Colour | Black |
Installation and care
This sponge rubber seal can be easily cut to your required length using standard workshop shears or a sharp utility knife. Ensure the mating surface is thoroughly cleaned, degreased and completely dry before peeling back the adhesive liner and applying firm, even pressure along the length of the seal.
Fitting tips
- Clean the application surface with a suitable solvent to remove dust and oils.
- Apply the seal at room temperature for the best adhesive bond.
- Avoid stretching the rubber as you press it into place; lay it naturally to prevent it pulling back over time.
- Press firmly along the entire length to ensure the self-adhesive backing makes full contact.
Complete your project
- TPE Square U Channel – 7mm x 18mm for 3mm Panels – 25m Coil
- TPE U Channel Edge Trim – 9mm x 12mm – 50m Coil
- TPE Square U Channel – 11mm x 12mm for 6.5–7mm Panels – 50m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Can this be used outdoors?
Yes, EPDM sponge offers excellent resistance to weathering, UV and ozone, making it highly suitable for exterior applications.
How do I cut this seal?
The profile can be easily cut to size using standard household or workshop tools, such as a sharp knife or heavy-duty scissors.
Is the adhesive backing waterproof?
While the EPDM rubber itself provides a watertight seal when compressed, the adhesive is designed for mounting purposes. For areas with heavy water exposure, ensure the surface is perfectly clean before application to maximise the bond.
If you need further advice on selecting the right profile, please contact our team.
Product details
| SKU | IP-EPDMS-12.5X12.5-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Sponge D Section – Self-Adhesive 12.5mm x 12.5mm – 25m Coil