
Rubber & FoamSKU IP-EPDMU-13.2X17-20
EPDM Square U Channel – 13.2mm x 17mm for 7mm Panels – Cut Lengths
Price shown updates with the option you pick.
This EPDM square U channel 13.2mm x 17mm is a solid black rubber edge trim that pushes over 7mm panels to cap sharp edges and soak up knocks. It is sold as one continuous cut length, from 20m up to a full 50m coil.
At a glance
- Square U profile, 13.2mm wide x 17mm high
- 7mm slot, about 13.9mm deep, for 7mm sheet, board and glass edges
- Solid 3.1mm walls for real impact protection
- EPDM rubber: weather, ozone and UV resistant
- Push-on friction fit, no tools needed; bond for a permanent seal
- One continuous length per order, 20m to 50m
Typical uses
- Rubber edge protector for 7mm guard panels, machine frames and enclosures
- Edge trim for glass, polycarbonate and acrylic screens and glazing contours
- Bump strip on vending machines, cabinets, furniture and display units
- Safety edging on stairs, running boards and access platforms
- Weatherproof edge seal on doors, hatches and covers
Which one do I need?
Pick the channel by the thickness of the edge it has to grip:
| Profile | Suits |
|---|---|
| EPDM square U 9.2mm x 15mm | 6mm panels, slimmer profile |
| EPDM square U 13.2mm x 17mm (this item) | 7mm panels needing thick, protective walls |
| Square U 13mm x 13mm, 9mm slot | 9mm boards and panels |
| EPDM U 26mm x 26mm | 10mm boards and thick guards |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Colour | Black |
| Overall size | 13.2mm wide x 17mm high |
| Slot | 7mm wide |
| To fit panel | 7mm |
| Wall thickness | 3.1mm |
| Hardness | 65-75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Weight | 0.14kg per metre |
| Unit of sale | One continuous cut length, 20m to 50m |
How much do I need?
Measure every edge you want to cover, add them together and allow about 5% for trimming. Example: six guard panels 1.5m wide x 1m high, edged on all four sides, need 6 x 5m = 30m, plus 5% = 31.5m, so choose 32m. Each option is one unbroken piece; the full 50m coil is the best value if you are close to that length.
Fitting tips
- Check the edge is 7mm thick: the slot grips firmly on that size and will be loose on 5mm or 6mm sheet.
- Clean the edge of dust and oil, start on a straight run and press the channel on with the heel of your hand or a rubber mallet.
- On tight outside corners, cut a small V-notch from the inside of the base so the channel bends without bunching.
- For a permanent or watertight fit, run a bead of polyurethane or silicone sealant into the slot first.
- To fit a slightly thinner edge, bond a thin rubber strip inside the slot to take up the gap.
Complete your project
- EPDM Square U Channel – 9.2mm x 15mm for 6mm Panels
- EPDM Square U Channel – 14.7mm x 22mm – Cut Lengths
- Solid EPDM U Channel – 26mm x 26mm – Fits 10mm Panels
Questions
Will it fit a 6mm panel?
It is made for 7mm and will be loose on 6mm. Choose the 9.2mm x 15mm channel for 6mm edges, or bond a thin strip inside this one.
Can this rubber edge trim be used outdoors?
Yes. EPDM resists weather, ozone, UV and temperature swings, so it suits outdoor doors, hatches and guards.
Is it hollow or solid?
Solid rubber throughout, with 3.1mm walls, which is why it absorbs knocks better than thin trims.
Why is the 50m length cheaper than 49m?
50m is a full coil and needs no cutting, so it is priced as a complete coil. If you need more than about 38m, the full coil is the better buy.
Do I need adhesive?
Not for most edges: it is a friction fit. Use a sealant in the slot where it must stay put under vibration or keep water out.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-EPDMU-13.2X17-20 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Square U Channel – 13.2mm x 17mm for 7mm Panels – Cut Lengths