
Rubber & FoamSKU IP-EPDMU-14.7X22-5
EPDM Square U Channel – 14.7mm x 22mm – Cut Lengths
Price shown updates with the option you pick.
This EPDM square U channel 14.7mm x 22mm is a thick-walled, solid black rubber edge trim that pushes over 5.75mm panels to cover sharp edges and absorb knocks. It is sold as one continuous cut length, from 5m up to a full 30m coil.
At a glance
- Square U profile, 14.7mm wide x 22mm high
- 5.75mm slot, 18mm deep, for 5.75mm sheet, board and glass edges
- Heavy 4.5mm side walls for real impact protection
- Solid EPDM rubber: weather, ozone and UV resistant
- Push-on friction fit, no tools needed; bond for a permanent seal
- One continuous length per order, 5m to 30m
Typical uses
- Rubber edge protector for guard panels, machine frames and enclosures
- Edge trim for 6mm-class glass, polycarbonate and acrylic screens
- Bump strip on trolleys, cabinets, vending machines and display units
- Safety edging on steps, running boards and access platforms
- Weatherproof edge seal on outdoor doors, hatches and covers
Which one do I need?
Pick the channel by the thickness of the edge it has to grip:
| Profile | Suits |
|---|---|
| EPDM square U 6mm x 8mm | 3mm sheet and light trims |
| EPDM U 12mm x 11mm | 4.75mm panels, low profile |
| EPDM square U 14.7mm x 22mm (this item) | 5.75mm panels needing a deep, heavy-duty edge |
| EPDM U 26mm x 26mm | 10mm boards and thick guards |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Colour | Black |
| Overall size | 14.7mm wide x 22mm high |
| Slot | 5.75mm wide x 18mm deep |
| To fit panel | 5.75mm |
| Side wall | approx. 4.5mm |
| Hardness | 65-75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Weight | 0.27kg per metre |
| Unit of sale | One continuous cut length, 5m to 30m |
How much do I need?
Measure every edge you want to cover and add them together, then allow about 5% for trimming. Example: a guard panel 1.2m wide x 0.9m high edged on all four sides needs 4.2m, plus 5% = 4.4m, so choose the 5m length. Each option is supplied as one unbroken piece, so you can run it continuously round corners and cut it to fit on site.
Fitting tips
- Check the edge is 5.75mm thick: the slot grips firmly on that size and will be loose on 4mm sheet.
- Start at a straight section, not a corner, and press the channel on with the heel of your hand or a rubber mallet.
- On tight outside corners, cut a small V-notch from the inside of the base so the channel bends without bunching.
- For a permanent or watertight fit, run a bead of polyurethane or silicone sealant into the slot before fitting.
Complete your project
- EPDM Square U Channel – 6mm x 8mm – 3mm Panel
- Solid EPDM U Channel – 17mm x 17mm – Fits 3mm to 6mm Panels
- Solid EPDM U Channel – 26mm x 26mm – Fits 10mm Panels
Questions
Will it fit a 6mm panel?
It is made for 5.75mm. A 6mm edge will usually go in but is a very tight fit; for anything thicker choose a wider slot.
Can it be used outdoors?
Yes. EPDM resists weather, ozone, UV and temperature swings, so it suits outdoor doors, hatches and guards.
Is it hollow or solid?
Solid rubber throughout, with thick 4.5mm side walls, which is why it absorbs knocks better than thin trims.
Do I need adhesive?
No for most edges: it is a friction fit. Use a sealant in the slot where it must stay put under vibration or keep water out.
Need help choosing? Contact our technical team with your panel thickness or application and we will point you to the right profile.
Product details
| SKU | IP-EPDMU-14.7X22-5 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Square U Channel – 14.7mm x 22mm – Cut Lengths