
Rubber & FoamSKU IP-PVCD-80X58X12-3
Hollow PVC DD Fender – 80mm x 58mm, 12mm Wall – Non-Marking – Per Strip
Price shown updates with the option you pick.
This hollow PVC DD fender 80mm x 58mm is a non-marking bumper strip with a 12mm wall that absorbs knocks from boats, lorries and handling equipment before they reach your jetty, dock edge or vehicle. It is sold per strip, in a 3m or 9m length.
At a glance
- 80mm wide x 58mm deep D profile with a hollow core
- Thick 12mm wall for a firm but cushioned impact
- Non-marking black PVC, 67 Shore A
- UV stabilised for outdoor marine and dock use
- Works from -40°C to +60°C
- Phthalate free and fully recyclable
- Sold per strip: 3m or 9m length
Typical uses
- Pontoon, jetty and marina edge protection
- Boat rubbing strake and gunwale fender
- Loading bay and dock edge bumper strip
- Impact protection on lorry bodies, trailers and tail lifts
- Wall and column protection in yards and warehouses
Which one do I need?
| Fender | Size | Best for |
| Hollow PVC DD fender | 47mm x 28mm | Small boats, trailers and light knocks |
| Hollow PVC DD fender (this item) | 80mm x 58mm, 12mm wall | Mid-size vessels, pontoons and loading bay edges |
| Hollow TPE delta D fender | 80mm x 70mm | Deeper cushioning on jetties and dock walls |
| TPE delta D fender | 110mm x 95mm | Larger vessels and heavier vehicle impacts |
Technical drawing
Specification
| Profile | Hollow D, 80mm wide x 58mm deep |
| Wall thickness | 12mm |
| Material | Non-marking PVC |
| Hardness | 67 Shore A |
| Weight | 3.21kg per metre |
| Colour | Black |
| Temperature range | -40°C to +60°C |
| Unit of sale | One strip, 3m or 9m long |
How much do I need?
Measure the edge you want to protect and choose the strip that covers it with the fewest joins. Example: a 7.5m pontoon edge needs one 9m strip (cut 1.5m off) rather than three 3m strips with two joins. A 9m strip weighs about 29kg, so plan for two people when fitting long runs.
Fitting tips
- Fit the flat back of the D against the surface, with the rounded face outwards.
- Bolt through the flat back with stainless fixings and large washers, or slide it into a matching channel.
- Pre-drill fixing holes; PVC drills and cuts cleanly with ordinary tools.
- Chamfer the cut ends so ropes and hulls do not catch on a square edge.
- Leave a small gap at joins on long runs to allow for movement in hot weather.
Complete your project
- Hollow PVC DD Fender – 47mm x 28mm for smaller boats and trailers
- EPDM Rubber B Fender with Stainless Steel Strip – 76mm x 32mm for a hard-wearing rubbing strake
- Hollow TPE Delta D Fender – 80mm x 70mm for deeper cushioning
Questions
Will this PVC fender mark my boat or vehicle?
No. The PVC compound is non-marking, so it will not leave black scuffs on hulls, paintwork or dock surfaces.
Can the DD fender stay outdoors all year?
Yes. It is UV stabilised and works from -40°C to +60°C, so it suits marinas, pontoons and open loading bays.
How do I fit an 80mm x 58mm bumper strip?
Bolt it through the flat back with stainless fixings, or fit it into a channel of matching width. It can be cut, drilled and chamfered on site.
Which length should I order?
Choose the length that covers your edge with the fewest joins: 3m for short runs and vehicle bumpers, 9m for pontoons and long dock edges.
Is the material recyclable?
Yes. The PVC is phthalate free and fully recyclable.
Need help choosing a fender? Contact our team and we will help you pick the right profile.
Product details
| SKU | IP-PVCD-80X58X12-3 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow PVC DD Fender – 80mm x 58mm, 12mm Wall – Non-Marking – Per Strip