Rubber & FoamRubberSKU IP-SIPX-15X6-10M
High Temperature Silicone P Extrusion – 15mm x 6mm Hollow Bead – 10m Roll
This grey high temperature silicone P extrusion 15mm x 6mm is a compact hollow-bead seal for oven doors, hot-air enclosures and food equipment, sold as a 10m roll. A flat 15mm flange fixes to the frame while the 6mm hollow bead compresses to close the gap, and the silicone runs continuously at 270°C with peaks to 300°C.
At a glance
- Silicone P seal: 15mm flange with a 6mm diameter hollow bead
- 1.5mm wall for a soft, low closing force
- Continuous service -60°C to 270°C, intermittent to 300°C
- Grey silicone, 60° Shore A
- Good shape memory over repeated door cycles
- UV, ozone and weather resistant; supplied as one 10m roll
Typical uses
- Oven door gasket and hot cabinet seals
- Door and hatch seals on dryers, ovens and heat tunnels
- Food processing equipment doors and covers
- Electrical and control enclosure doors near heat sources
- Glazing and panel seals that need a small hollow bulb seal
Which one do I need?
| Gap to close | Profile to choose |
| About 3mm to 5mm | This HT silicone P extrusion 15mm x 6mm |
| About 8mm to 12mm | HT silicone P extrusion 35mm x 15mm |
| About 12mm to 18mm | HT silicone P profile 40mm x 20mm |
| About 15mm to 22mm | HT silicone P extrusion 50mm x 25mm |
Choose a bead that is compressed by roughly a quarter to a third when the door is shut; gap ranges above are a guide.
Technical drawing
Specification
| Product | High temperature silicone P extrusion |
| Size | 15mm flange x ø6mm hollow bead |
| Wall thickness | 1.5mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Colour | Grey |
| Continuous temperature | -60°C to 270°C |
| Intermittent maximum | 300°C |
| Unit of sale | One 10m roll |
How much do I need?
Measure round the door opening where the seal will sit. Example: an oven door 600mm wide x 500mm high needs 2 x 0.6m + 2 x 0.5m = 2.2m per door, so one 10m roll seals four such doors with 1.2m spare for trimming.
Fitting tips
- Fit the flange to the frame and let the hollow bead meet the door face, so it is compressed evenly all round.
- Clean and degrease the frame; bond the flange with a high temperature silicone adhesive, or clamp it under a retaining strip.
- Do not stretch the profile while fitting; lay it in and press down.
- Mitre the corners at 45° or cut a small notch in the flange so the bead turns the corner without kinking.
- Butt the two ends together and seal the joint with a dab of silicone adhesive.
Complete your project
- High temperature silicone P extrusion 35mm x 15mm
- High temperature silicone P profile seal 40mm x 20mm
- High temperature silicone rubber sheet for gaskets
Questions
What temperature can this silicone P seal take?
It is rated for continuous use from -60°C to 270°C and short peaks up to 300°C, which suits most oven and dryer doors.
How is the oven door seal fixed?
Bond the flat 15mm flange with a high temperature silicone adhesive, or hold it under a metal retaining strip.
Will the hollow bead flatten over time?
Silicone has good shape memory, so the 6mm bead recovers after repeated opening and closing.
Is it suitable for food equipment?
Food processing equipment is a stated use. If you need a formal food contact declaration, contact us before ordering.
What colour is it and how is it sold?
It is grey silicone, sold as one continuous 10m roll.
Need help choosing a high temperature seal? Contact our team for advice.
Product details
| SKU | IP-SIPX-15X6-10M |
|---|---|
| Material | Rubber |
| Form | Profile |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:High Temperature Silicone P Extrusion – 15mm x 6mm Hollow Bead – 10m Roll