Rubber & FoamSKU IP-SPPS-40X20-STD
High-Temperature Silicone P-Profile Seal – 40mm x 20mm – 10m Roll
This high temperature silicone P seal 40mm x 20mm is a grey P-section gasket with a 40mm flat flange and a hollow 20mm bead, made for oven doors, furnaces and hot enclosures that run continuously up to 270°C. It is sold as a 10m roll.
At a glance
- 40mm overall width with a flat fixing flange
- Hollow 20mm bead with a heavier 3mm wall
- Rated -60°C to +270°C constant, 300°C intermittent
- Grey high temperature silicone, 60° Shore A
- UV stable with good weathering and chemical resistance
- Supplied as a 10m roll – cut to length
Typical uses
- Industrial and bakery oven door gaskets
- Dryer, curing and heat-treatment cabinet doors
- Hot enclosures and inspection hatches on process plant
- Food processing equipment running at high temperature
- Glazed viewing panels on heated equipment
Which one do I need?
| Seal | Best for |
|---|---|
| 35mm x 15mm high temperature | Smaller hot doors and narrower gaps |
| 40mm x 20mm high temperature (this product) | Medium to wide gaps on oven and dryer doors |
| 50mm x 25mm high temperature | The widest gaps and large furnace doors |
| 40mm x 20mm standard silicone | Same size in black up to 200°C, on a 25m coil |
Technical drawing
Specification
| Profile | P section – flat flange with hollow round bead |
| Overall width | 40mm |
| Bead diameter | 20mm |
| Wall thickness | 3mm |
| Material | High temperature silicone |
| Colour | Grey |
| Hardness | 60° Shore A |
| Constant temperature | -60°C to +270°C |
| Intermittent maximum | 300°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 10m roll |
How much do I need?
Measure the full perimeter of each door and add about 50mm per joint. Example: an oven door 900mm x 700mm has a 3.2m perimeter, so one 10m roll seals three doors with a little spare. For four or more doors of this size, order two rolls.
Fitting tips
- Clean and degrease the fixing face so the flange sits fully flat.
- Use a clamp strip, rivets or an adhesive rated for the working temperature – fix through the flange only.
- Fit the bead so the door closes onto its round face without crushing it flat.
- Cut square with a sharp blade and butt-join at corners instead of stretching the seal.
Complete your project
- High Temperature Silicone P Extrusion – 50mm x 25mm – 10m Length
- High-Temperature Silicone P Extrusion – 35mm x 15mm – 10m Roll
- Silicone P Extrusion – 40mm Flange x 20mm Bead – 25m Coil
Questions
How hot can this P seal run?
It is rated for constant use from -60°C to +270°C, with short peaks up to 300°C.
How is it different from the black 40mm x 20mm P extrusion?
This grey grade has a heavier 3mm wall and a higher temperature rating (270°C against 200°C), and it is sold in 10m rolls rather than 25m coils.
Can it be used outdoors?
Yes. The silicone is UV stable and resists weathering, so it suits outdoor enclosures as well as ovens.
How do I fix it?
Clamp or rivet the 40mm flange, or bond it with an adhesive rated for the temperature. Keep fixings off the bead so it can compress.
Will it take a permanent set?
Silicone has good shape memory, so the bead recovers well over repeated door openings when fitted with moderate compression.
Not sure which size or grade suits your application? Contact our team and we will help you choose.
Product details
| SKU | IP-SPPS-40X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:High-Temperature Silicone P-Profile Seal – 40mm x 20mm – 10m Roll