Rubber & FoamSKU IP-IPSPE-25X10-STD
High-Temperature Silicone P Extrusion – 25mm x 10mm – 10m Coil
This high-temperature silicone P extrusion 25mm x 10mm pairs a 25mm flat fixing flange with a 10mm hollow bead, making a compressible door and enclosure seal that keeps working at up to 270°C. It is made in grey high-temperature silicone and sold as one continuous 10-metre coil.
At a glance
- 25mm flange with a 10mm hollow bead (2mm wall, 6mm bore)
- High-temperature silicone, 60° Shore A, grey
- Continuous service from -60°C to +270°C, 300°C intermittent
- Hollow bead compresses easily and recovers after thousands of door cycles
- UV stable with good weathering and chemical resistance
- One 10m coil, cut to length on site
Typical uses
- Oven, prover and dryer door gaskets
- Seals on heat-treatment cabinets and hot-air enclosures
- Door and hatch seals on food processing equipment
- Gaskets for lighting, heating and electrical enclosures
Which one do I need?
Pick the P extrusion by the gap your door closes onto: the bead should squeeze by roughly a quarter to a third of its diameter.
| Size | Best for |
|---|---|
| 15mm x 6mm | Small gaps of about 4mm on light doors and lids |
| 25mm x 10mm (this product) | Gaps of about 7mm on oven and cabinet doors |
| 30mm x 12mm | Gaps of about 8-9mm on larger doors |
| 35mm x 15mm | Wider gaps and heavier hinged doors |
Technical drawing
Specification
| Flange length | 25mm |
| Bead diameter | 10mm, hollow |
| Wall thickness | 2mm |
| Material | High-temperature silicone |
| Hardness | 60° Shore A |
| Temperature range | -60°C to +270°C continuous, +300°C intermittent |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Colour | Grey |
| Unit of sale | One 10m coil |
How much do I need?
Measure the perimeter of each door and add 50mm for the joint. Example: an oven door opening of 600mm x 450mm needs 2.1m + 50mm, so one 10m coil seals four doors of that size.
Fitting tips
- Fix the flange with a high-temperature silicone adhesive or clamp it under a retaining strip.
- Set the bead so the door squeezes it by a quarter to a third – never crush it flat.
- Do not stretch the profile while fitting; stretching thins the bead.
- Make the joint at the top of the door and bond the butt ends with high-temperature silicone.
Complete your project
- High Temperature Silicone P Extrusion – 15mm x 6mm – 10m Roll
- High-Temperature Silicone P Extrusion – 30mm x 12mm – 10m Coil
- High Temperature Silicone P Extrusion – 50mm x 25mm – 10m Length
Questions
Is it suitable for a commercial oven door?
Yes. It is rated for continuous use up to 270°C with peaks of 300°C, which covers most commercial and industrial ovens.
How do I fix it?
Bond the flat 25mm flange with a high-temperature silicone adhesive, or clamp it under a retaining strip or frame.
Will the bead flatten over time?
The hollow silicone bead has good shape memory, so it recovers after each door closing provided it is not over-compressed.
Can I cut the coil?
Yes. Cut it square with a sharp knife; each coil is one continuous 10m length.
Not sure which size or material is right for your job? Contact our team with your panel thickness or gap size and we will help you choose.
Product details
| SKU | IP-IPSPE-25X10-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:High-Temperature Silicone P Extrusion – 25mm x 10mm – 10m Coil