Rubber & FoamSKU IP-SPEX-40X20-STD
Silicone P Extrusion – 40mm Flange x 20mm Bead – 25m Coil
This silicone P extrusion 40mm x 20mm is a black P-section seal with a 40mm flat flange and a hollow 20mm bead, made for sealing doors, hatches and enclosures on ovens, food equipment and machinery. It is sold as one continuous 25m coil.
At a glance
- 40mm overall width with a flat flange for fixing
- Hollow 20mm round bead that compresses to close wider or uneven gaps
- 2mm wall for a soft, low closing force
- Food contact silicone to FDA guidance, black
- Works from -50°C to +200°C
- Supplied as a 25m coil – cut to length on site
Typical uses
- Oven, prover and dryer door seals in food production
- Doors and access panels on processing machinery
- Enclosure and cabinet doors that need a soft, deep seal
- Cold room and chiller hatches where the gap is large
- Glazed panels and inspection windows on equipment
Which one do I need?
| Size | Best for |
|---|---|
| 27mm x 13mm food contact | Small doors and narrow gaps |
| 36mm x 14mm food contact | Medium doors with a narrow fixing face |
| 42mm x 17mm | Wide fixing flange, medium gaps |
| 40mm x 20mm (this product) | Wider or uneven gaps on door frames |
| 50mm x 25mm high temperature | The largest gaps and hotter oven doors |
Technical drawing
Specification
| Profile | P section – flat flange with hollow round bead |
| Overall width | 40mm |
| Bead diameter | 20mm |
| Wall thickness | 2mm |
| Material | Silicone, food contact (FDA) |
| Colour | Black |
| Hardness | 60° Shore A |
| Working temperature | -50°C to +200°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Unit of sale | 25m coil |
How much do I need?
Measure the full perimeter of each door or panel and add about 50mm per joint for a neat butt. Example: a 1200mm x 800mm oven door has a 4.0m perimeter, so one 25m coil seals six doors with a little spare. Order a second coil if your total runs over 24m.
Fitting tips
- Clean and degrease the fixing face so the flange sits fully flat before fixing.
- Fix through or bond the flange only – keep fasteners and adhesive off the hollow bead so it can compress.
- Fit the bead on the door side of the frame so the door closes onto the round face, not the edge.
- Cut square with a sharp blade and butt-join at corners rather than stretching the seal round them.
Complete your project
- Silicone P Extrusion – 42mm Flange x 17mm Bead – 25m Coil
- High Temperature Silicone P Extrusion – 50mm x 25mm – 10m Length
- Silicone P Extrusion – Food Contact Grade – 36mm x 14mm – 25m Coil
Questions
Which gaps suit a 20mm bead?
The 20mm hollow bead suits wider or uneven door gaps. As a guide, fit a P seal so the bead compresses by about a quarter of its height when the door closes.
Is this P seal suitable for food areas?
Yes. It is made from food contact silicone to FDA guidance, so it can be used on ovens, provers and processing equipment.
How hot can it run?
The silicone is rated from -50°C to +200°C, which covers most oven doors, dryers and cold rooms.
How do I fix the flange?
Bond the 40mm flange with a silicone-compatible adhesive or clamp it under a retaining strip or rivets. Keep fixings clear of the bead.
How is it supplied?
As one continuous 25m coil, which you cut to the lengths you need.
Not sure which size or grade suits your application? Contact our team and we will help you choose.
Product details
| SKU | IP-SPEX-40X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone P Extrusion – 40mm Flange x 20mm Bead – 25m Coil