
Rubber & FoamSKU IP-IRCP-330X85-STD
Industrial Rubber Cable Protector – 330mm x 85mm – 1.5m Length
This heavy-duty rubber cable protector 330mm x 85mm shields power cables, welding leads, hoses and pipes from crushing where vehicles and foot traffic cross them. Each 1.5m length has two 53mm channels and a split base, so cables push in from underneath without unplugging.
At a glance
- 330mm wide x 85mm high with ramped sides for smoother crossing
- Two 53mm diameter channels for large cables, hoses or pipes
- Split base: open it and press cables up into the channels
- Toughened NR/SBR rubber, 75 Shore A
- UV stable for long-term outdoor use; fire tested to BS 476 Part 7 Class 3
- Sold per 1.5m length; butt lengths together for longer runs
Typical uses
- Heavy cable and hose crossings in warehouses and distribution centres
- Temporary power and water runs across construction sites
- Protecting welding leads and air lines in fabrication shops and machine halls
- Industrial yards where site vehicles cross service runs
Which one do I need?
| Profile | Best for |
|---|---|
| 83mm x 14mm low profile | Small leads in offices and walkways |
| 108mm x 14mm, 2 channel | Two small cables under light foot traffic |
| 180mm x 36mm, 30mm hole | One medium cable or hose up to 30mm |
| 330mm x 85mm, 2 x 53mm (this one) | Two large cables or hoses up to 53mm where vehicles cross |
Technical drawing
Specification
| Overall size | 330mm wide x 85mm high |
| Channels | 2, each 53mm diameter |
| Base | Split membrane for under-side cable entry |
| Material | NR/SBR rubber blend |
| Hardness | 75 Shore A |
| Fire rating | BS 476 Part 7 Class 3 |
| Colour | Black |
| Unit of sale | 1.5m length |
How much do I need?
Measure the width of the crossing and divide by 1.5m, rounding up. A 6m wide roadway inside a yard needs 6 / 1.5 = 4 lengths; a 4m doorway needs 3 lengths (4.5m), leaving a little overlap at each side.
Fitting tips
- Sweep the floor clear of grit and debris so the protector sits flat
- Open the split base and press each cable up into its channel rather than threading from the end
- Use one channel per cable or hose and keep them flat, not twisted
- Butt lengths tightly together so there are no gaps at the joints
Complete your project
- Rubber Cable Protector – 180mm x 36mm, 30mm Hole – 4.5m Length
- Rubber Cable Protector – 108mm x 14mm, 2 Channel – Per Length
- Low Profile Cable Protector – 83mm x 14mm NR/SBR – Per Length
Questions
What size cable or hose will fit?
Each of the two channels is 53mm in diameter, so it takes cables, hoses or pipes up to that outside diameter.
Can vehicles drive over this heavy-duty cable cover?
Yes. It is designed to protect cables in industrial areas with vehicle traffic; drive over it slowly and at right angles.
Can I use it outdoors?
Yes. The rubber compound is UV stable and suits long-term outdoor use on sites and yards.
How do I fit the cables?
Open the split base, press each cable up into its channel and let the rubber close round it - no need to disconnect plugs or thread from the end.
Need help choosing the right cable protector? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-IRCP-330X85-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Industrial Rubber Cable Protector – 330mm x 85mm – 1.5m Length