
Rubber & FoamSKU IP-PES-50X8-10M
Polyethylene Sponge Strip – 50mm x 8mm – 10m Roll
This grey polyethylene sponge strip measures exactly 50mm wide and 8mm thick, supplied in a 10m roll with a strong self-adhesive backing applied to the 50mm face. Manufactured from closed-cell, cross-linked cellular polyethylene, it is designed for maintenance engineers, fabricators, and shopfitters who need a reliable, compressible seal for panels, enclosures, doors, and windows.
At a glance
- 50mm wide x 8mm thick profile
- Supplied in a continuous 10m roll
- Pre-applied self-adhesive backing on the wide face
- Closed-cell, cross-linked cellular polyethylene
- Requires only 15-20% compression for an airtight seal
- Grey finish
Typical uses
- Sealing panels and enclosures against dust and liquids
- Door and window seals in automotive, marine, and transport
- Vibration isolation between mating surfaces
- Shock-absorbing cushions for equipment
- General-purpose gaskets and case inserts
Which one do I need?
| Width x Thickness | Best suited for |
|---|---|
| 50mm x 8mm | Wide, medium-thickness sealing for large panels, enclosures, and heavy-duty vibration isolation. |
| Smaller widths (e.g. 20mm, 30mm) | Narrower gaps, standard door frames, and lighter equipment enclosures. |
| Thinner profiles (e.g. 3mm, 5mm) | Tight clearances where minimal compression depth is available. |
Technical drawing
Specification
| Material | Polyethylene (PE) |
| Cellular structure | Closed cell, cross-linked |
| Colour | Grey |
| Density (Range) | 28-38 kg/m³ |
| Tensile Strength | >250 Kpa |
| Elongation at Break | >170% |
| Compressive Strength (10% Deflection) | 35-55 Kpa |
| Compressive Strength (25% Deflection) | 55-85 Kpa |
| Compressive Strength (50% Deflection) | 120-170 Kpa |
| Compression Set (22h @ 23°C) | 15% |
| Working Temperature Range | -60°C to +100°C |
| Water Absorption (7 days) | <1% Vol |
| Weight | 0.03kg per metre |
Installation and care
The self-adhesive backing makes installation straightforward with no additional tools required. Ensure the mating surface is clean, dry, and free from grease or dust before application. Because the material is closed-cell, it only needs to be compressed by 15-20% to form an effective air and watertight seal. The uniform cell structure distributes pressure evenly, preventing cell wall rupture and extending the service life of the strip.
Fitting tips
- Clean the application surface thoroughly with a suitable degreaser before fitting.
- Peel the backing paper back gradually as you apply the strip to prevent it sticking to itself.
- Apply firm, even pressure along the entire length to ensure the adhesive bonds fully.
- Avoid stretching the sponge strip during installation, as it may shrink back over time.
Complete your project
- Black TPE P Profile Rubber Seal – 43mm x 6mm Bulb – 25m Coil
- Neoprene B Fender End Stop – 51mm x 25mm – Pre-Punched – Each
- EPDM Rubber Ramp Edge – 40mm x 7mm – 10m Roll
Data sheet
Download the technical data sheet (PDF)
Questions
Is the adhesive on the wide or narrow edge?
The self-adhesive backing is applied to the largest dimension, which is the 50mm wide face.
How much do I need to compress it to get a watertight seal?
The closed-cell structure means you only need to compress the strip by 15-20% of its thickness to achieve an airtight and watertight seal.
Can this be used outdoors?
Yes, closed-cell polyethylene has excellent resistance to water absorption and operates effectively in temperatures from -60°C to +100°C.
How is this product supplied?
It is supplied as a continuous 10-metre roll.
Need help choosing the right size for your enclosure? Contact our team for advice.
Product details
| SKU | IP-PES-50X8-10M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Polyethylene Sponge Strip – 50mm x 8mm – 10m Roll