
Rubber & FoamSKU IP-PUEP-45X45-1M
Polyurethane Foam Edge Protector – 45mm x 45mm L-Profile – 1m Length
This PU foam edge protector, a 45mm x 45mm polyurethane L-profile sold as a single 1-metre length, provides high-impact absorption for sharp 90-degree corners in busy industrial environments. With pre-applied self-adhesive backing, it features bold yellow and black hazard stripes to maximise visibility and prevent accidents before they happen.
At a glance
- High-density, flexible polyurethane (PU) foam construction
- Equal 45mm x 45mm L-shaped profile for 90-degree corners
- Vibrant yellow and black hazard stripes for maximum visibility
- Pre-applied high-bond self-adhesive tape for quick installation
- Resilient material absorbs heavy shocks and returns to shape
- Resists moisture, oils, UV light, and temperature fluctuations
Typical uses
- Warehouse racking and shelving units
- Loading docks and commercial bay doors
- Low-ceiling beams and overhead hazards
- Industrial machinery and automated guided vehicles (AGVs)
- Forklift traffic routes and manufacturing bays
Which one do I need?
| Profile | Best for |
| 45mm x 45mm L-profile (this item) | Square 90° outside corners on racking uprights, columns, machine housings and door frames |
| 60mm x 20mm flat profile | Flat faces such as walls, beams and the sides of machines where there is no corner |
| Trapezoid profile for 8mm edges | Thin exposed edges, for example sheet-metal guards and shelf lips |
| Round profile for 8mm edges | Thin edges and pipes where a rounded, softer bumper is preferred |
Technical drawing
Specification
| Material | Polyurethane (PU) foam |
| Profile | L-shaped (90-degree corner) |
| Size | 45mm x 45mm |
| Length | 1m |
| Colour | Yellow and black stripes |
| Hardness (Shore C) | 40° to 50° |
| Tensile strength | 8 to 20 MPa |
| Elongation at break | 150% to 350% |
| Tear strength | ≥22 kN/m |
| Operating temperature | -15°C to +75°C |
| Sold as | Each (one 1m length) |
How much do I need?
Each PU foam edge protector is 1 metre long. Measure the height of every corner you want to guard and round up: a 2.4m racking upright needs three lengths (the last one trimmed), and a doorway with two 2m sides needs four. Lengths can be butted end to end for a continuous run.
Fitting tips
- Clean the corner with a degreasing agent to remove all dust, oil, and moisture.
- Ensure the surface is completely dry before proceeding.
- Use a sharp utility knife or saw to cut the 1-metre strip to your required length if necessary.
- Partially peel back the protective liner from the self-adhesive tape.
- Align the protector flush against the 90-degree edge and press firmly along the entire length to activate the adhesive.
Complete your project
- PU Foam Edge Protector – 60mm x 20mm Flat Profile – 1m Length
- PU Foam Edge Protector – Trapezoid Profile for 8mm Edges – 1m Length
- TPE Edge Protector – 33mm x 45mm Black/Yellow – Pack of 10 x 1m Lengths
Questions
Can I cut this edge protector to size?
Yes, the 1-metre length can be easily cut to your required size using a sharp utility knife or saw.
What surfaces will the adhesive stick to?
The pre-applied high-bond tape is designed to adhere to clean, dry, and degreased surfaces such as metal racking, painted walls, and machinery casings.
Is this suitable for outdoor use?
Yes, the tough outer skin resists moisture, UV light, and temperature fluctuations between -15°C and +75°C.
Will this fit a rounded or angled corner?
The 45mm x 45mm L-profile is made for square 90° corners. For thin edges choose the trapezoid or round profile, and for flat surfaces the 60mm x 20mm flat profile.
Need help choosing the right safety bumper? Contact our team for advice.
Product details
| SKU | IP-PUEP-45X45-1M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Polyurethane Foam Edge Protector – 45mm x 45mm L-Profile – 1m Length