
Rubber & FoamSKU IP-PUEP-TRAP-40X40-1M
PU Foam Edge Protector – Trapezoid Profile for 8mm Edges – 1m Length
This PU foam edge protector for 8mm edges is a 40mm x 40mm trapezoid profile with a push-fit slot that slides straight onto exposed sheet metal, glass, shelf lips and thin steel flanges up to 8mm thick. Bold yellow and black hazard stripes make the edge easy to see, and the soft foam takes the sting out of knocks to heads, hands and vehicles. It is sold as a single 1m length.
At a glance
- 40mm x 40mm trapezoid edge guard with a push-fit slot for 8mm thick edges
- High-visibility yellow and black hazard stripes
- Flexible, impact-absorbing polyurethane (PU) foam with a tough outer skin
- Pre-applied self-adhesive tape inside the slot for a secure hold
- Works from -15°C to +75°C
- Cuts to length with a sharp knife or fine saw
Typical uses
- Safety bumper on exposed sheet metal edges and machine guards
- Edge guard on racking lips, shelf edges and thin steel beams in warehouses
- Protecting glass panels and partitions from knocks
- Marking low or projecting edges on conveyors, walkways and mezzanines
- Vehicle and plant bodywork edges in workshops and loading areas
Which one do I need?
| Edge protector | Fits | Best for |
|---|---|---|
| Trapezoid 40mm x 40mm (this item) | Edges up to 8mm thick | Push-fit guard on sheet, glass, shelf lips and flanges |
| Flat 60mm x 20mm | Flat walls and faces | Low-profile bumper on flat surfaces |
| Round corner 40mm x 40mm | 90° outside corners | Rounded corner guard on columns and frames |
| Right angle 47mm x 47mm | 90° outside corners | Larger corner guard on pillars and racking uprights |
Technical drawing
Specification
| Material | Polyurethane foam |
| Profile | Trapezoid, 40mm x 40mm |
| Slot | Push-fit, for edges up to 8mm thick |
| Fixing | Pre-applied self-adhesive tape |
| Colour | Yellow and black stripes |
| Hardness | 40-50° Shore C |
| Tensile strength | 8-20 MPa |
| Elongation at break | 150-350% |
| Tear strength | ≥22 kN/m |
| Operating temperature | -15°C to +75°C |
| Unit of sale | One 1m length |
How much do I need?
Measure every edge you want to cover and round up to whole metres, as each length is 1m. Example: the front lips of three 2.7m racking shelves need 3 x 2.7 = 8.1m, so order 9 lengths and trim the last one to fit.
Fitting tips
- Clean the edge with a degreaser and let it dry fully before fitting.
- Cut to length first with a sharp knife or fine-tooth saw for a square end.
- Peel back the liner a little at a time and push the slot fully home over the 8mm edge.
- Squeeze firmly along the length to bed the adhesive.
Complete your project
- PU Foam Edge Protector – 60mm x 20mm Flat Profile – 1m Length
- PU Foam Round Corner Protector – 40mm x 40mm – 1m Length
- Right Angle Edge Protection Guard 5m – Self-Adhesive PU Foam, 47 x 47mm
Questions
What edge thickness does this trapezoid edge protector fit?
The slot is made for edges up to 8mm thick, such as sheet steel, glass, shelf lips and thin flanges. It will not fit a 10mm edge.
How is the foam edge guard held in place?
It push-fits over the edge and is secured by pre-applied self-adhesive tape inside the slot.
Can I cut it to size?
Yes. The PU foam cuts cleanly with a sharp knife or fine-tooth saw.
Can it be used outdoors?
The tough outer skin resists moisture, oils and UV, so it suits covered outdoor areas within its -15°C to +75°C range.
Need help choosing the right edge protection? Contact our team for advice.
Product details
| SKU | IP-PUEP-TRAP-40X40-1M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:PU Foam Edge Protector – Trapezoid Profile for 8mm Edges – 1m Length