Heavy Duty Polyurethane Floor Paint for Garages & Workshops

Heavy-duty polyurethane floor paint for concrete, timber and metal floors in garages, workshops, warehouses and other demanding work areas. The oil-based polyurethane-resin coating produces a smooth semi-gloss finish designed to tolerate regular foot traffic, abrasion and routine cleaning when applied to a sound, correctly prepared substrate.

Recommended applications

• Concrete floors in garages, workshops, factories and warehouses
• Prepared timber and metal flooring or steps
• Sound, well-adhered existing floor coatings after cleaning and abrasion
• Domestic utility areas where a durable, cleanable floor finish is required

Technical specification

Surface preparation

Successful floor coating depends on adhesion to a clean, dry and stable surface. Remove dust, dirt, oil, grease and loose or flaking material. Repair cracks and surface defects before coating. Existing paint must be sound and firmly bonded; clean it thoroughly and lightly abrade it to provide a key.

Allow new concrete to mature for several months and seal it before applying the polyurethane topcoat. Do not apply this product to asphalt or power-floated flooring. If the substrate type, moisture condition or previous coating is uncertain, test a small representative area before proceeding.

Application guidance

Stir thoroughly before use and apply an even coat by brush, roller or suitable spray equipment. White spirit may be used for thinning where the current product instructions permit it. Maintain good ventilation during application and drying. Coat requirements vary with porosity, colour change and preparation, so follow the current container label and technical guidance for the selected system.

Coverage planning

At the stated 6–8 m² per litre, divide the total floor area by the expected coverage rate for one coat, then allow for surface texture, absorption, application losses and any additional coats. Porous or irregular concrete will normally use more material than a sealed, smooth surface.

Colour selection

Choose the required colour and pack size from the selectors. Standard industrial shades and mixed-colour options are available. For a custom option, provide the required RAL, British Standard or other colour reference so the specification can be confirmed. On-screen colours are indicative and should not be treated as an exact colour match.

Use and safety

Use this coating as part of a correctly prepared floor-paint system. For unusual chemical exposure, verify compatibility before application. Keep the container securely closed between uses, store away from naked flames and follow the current label and safety data sheet. Drying and coverage figures are guides and vary with temperature, ventilation, film thickness and substrate condition.

Application images are illustrative.