
Rubber & FoamSKU IP-PVCET-11X16.5-50M
PVC Self-Grip Edge Trim – 11mm x 16.5mm for 4mm to 5mm Panels – 50m Coil
A black PVC push-on edge trim with a steel carrier, made for panel edges 4 mm to 5 mm thick. It measures 11 mm wide by 16.5 mm high, with a 4 mm mouth that spreads open as it goes onto the edge. A U-shaped steel strip runs through the PVC for its whole length, and two angled gripping fins inside the channel bite on both faces of the panel, so it holds by clamping force alone, with no glue. It covers sharp cut edges, protects people and parts from knocks, and leaves a neat rounded finish. It comes as one continuous 50 m coil and is in stock in the UK for same-day dispatch.
At a glance
- Fits: steel, aluminium, plastic, fibreglass and board edges 4 mm to 5 mm thick
- Size: 11 mm wide × 16.5 mm high; 4 mm mouth before fitting
- Construction: flexible PVC, 67° to 82° Shore A, over a U-shaped steel carrier
- Grip: twin internal gripping fins; push on by hand, no adhesive, and it can be removed and refitted
- Working temperature: −10 °C to +60 °C, indoors or outdoors
- Supplied as: a 50 m coil in one piece, £545.76 inc VAT (about £10.92 per metre)
Technical drawing

All dimensions are in mm and nominal. The drawing is not to scale; the carrier and fin shapes are shown as typical.
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile | Self-gripping U edge trim with steel carrier and two internal gripping fins | Manufacturer drawing |
| Overall width | 11 mm | Manufacturer drawing and range data sheet |
| Overall height | 16.5 mm | Manufacturer drawing and range data sheet |
| Mouth opening (before fitting) | 4 mm; the lips spread open over the panel | Manufacturer drawing |
| Panel thickness it fits | 4 mm to 5 mm | Manufacturer page and range data sheet |
| Inside depth | Not stated by the manufacturer | Ask us if you need it |
| Jacket material | Flexible PVC | Manufacturer |
| Carrier | Steel, U-shaped, full length | Manufacturer |
| Colour | Black | Manufacturer |
| Hardness | 67° to 82° Shore A | Manufacturer data; method not stated |
| Minimum working temperature | −10 °C | Manufacturer data |
| Maximum working temperature | +60 °C | Manufacturer data |
| Density | Not stated for this profile | Ask us if you need it |
| Tensile strength | Not stated for this profile | Ask us if you need it |
| Elongation at break | Not stated for this profile | Ask us if you need it |
| Tear strength | Not stated for this profile | Ask us if you need it |
| Compression set | Not stated for this profile | Ask us if you need it |
| Dimensional tolerance | Not stated; dimensions are nominal | Ask us if you need it |
| Weight | Not stated for this profile | Ask us if you need it for carriage |
| Supplied as | One continuous 50 m coil | Manufacturer |
How it fits

- Check the edge. Measure the panel: it must be 4 mm to 5 mm thick. Deburr it and wipe it clean and dry.
- Push on. Start at one end and press the trim fully home by hand, working along the edge. The lips open up over the panel and both fins fold up against its faces.
- Seat it. Tap along the top with a rubber or plastic mallet, especially on curves and corners. No glue is needed.
- Cut and finish. Cut through the PVC and steel with heavy side cutters or a fine hacksaw. Butt the ends tightly together.
Typical uses
- Cut edges of 4 mm to 5 mm steel and aluminium machine guards, enclosures, cabinets and computer racks
- Garage door and shed panels, and sheet metal fabrications
- Fibreglass panels, hatches and marine equipment
- Playground and leisure equipment, as safety edging
- Vehicle interior side panels, side window edges, glass and furniture panels
Which edge trim do I need?
| Panel thickness | Best match |
|---|---|
| 1 mm to 1.5 mm | Self-Grip PVC Edge Trim 5.5 × 8.5 mm |
| 1 mm to 3 mm | Self-Grip PVC Edge Trim 9.5 × 14 mm |
| 1.5 mm to 3 mm | Self-Grip PVC Edge Trim 10.5 × 14.3 mm |
| 3 mm to 5 mm | Self-Grip PVC Edge Trim 10.5 × 14.5 mm |
| 3.5 mm to 4.5 mm | Self-Grip PVC Edge Trim 10 × 13.5 mm |
| 4 mm to 5 mm | This trim, 11 × 16.5 mm |
| 6 mm to 8 mm | Self-Grip PVC Edge Trim 14 × 16.2 mm |
Materials and compliance
The jacket is flexible PVC and the carrier is steel. The PVC resists weather, moisture and many common chemicals, which suits it to indoor and outdoor use within −10 °C to +60 °C. The manufacturer does not state any approvals (such as FDA, REACH or RoHS) for this profile, so we do not claim any. If you need a declaration for your project, contact us before ordering.
Frequently asked questions
How do I fit it?
Push it onto the clean edge by hand, starting at one end, then tap it home with a rubber mallet. The steel carrier and the two inner fins grip the panel, so no glue or fixings are needed.
What panel thickness does it fit?
4 mm to 5 mm. The 4 mm mouth spreads open as it goes on, so the steel carrier clamps the panel from both sides. On thinner sheet it will not grip firmly; see the table above for trims that fit other thicknesses.
How much will I get from one coil?
One 50 m coil in a single piece. Add up the length of every edge to be covered; for example, twenty guard panels with a 2.4 m top edge need 48 m, so one coil covers them.
Will it go round corners and curves?
Yes. The steel carrier lets it bend around gentle curves and radiused corners and hold the shape. Tap it home with a mallet as you go. For a sharp 90° corner, cut it and butt the two ends.
How do I cut and join it?
Cut through the PVC and the steel carrier with heavy side cutters or a fine-tooth hacksaw. There is no jointing piece; butt the cut ends tightly together on the edge.
Can it be used outdoors?
Yes. The PVC jacket resists weather and moisture. Its working range is −10 °C to +60 °C, so it suits UK outdoor use but not hot areas such as engine bays or ovens.
Can I remove it and use it again?
Yes. Because it holds by grip rather than adhesive, it can be pulled off and refitted, although the fins grip best the first time.
Does it seal as well as protect?
It is a protective edge trim with no sponge bulb, so it is not designed as a weather seal. If you need a seal on the same edge, ask us about self-grip trims with a sponge bulb.
Need help choosing? Call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-PVCET-11X16.5-50M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:PVC Self-Grip Edge Trim – 11mm x 16.5mm for 4mm to 5mm Panels – 50m Coil