Rubber & FoamSKU IP-SFT-2.3X5.5-BLUTINT-10M
Silicone Fuel Tubing – 2.3mm Bore x 5.5mm OD – 10m or 50m Coil
Price shown updates with the option you pick.
This silicone fuel tubing has a 2.3mm bore and 5.5mm outside diameter, made for nitro, methanol and glow fuel lines on radio-controlled cars, boats and aircraft. It is sold as one continuous coil of 10m or 50m in a choice of nine colours.
At a glance
- 2.3mm inside diameter, 5.5mm outside diameter, 1.6mm wall
- Soft 60° Shore A silicone that grips standard model fuel nipples
- Resists methanol and nitro (glow) fuels – not for petrol
- Stays flexible from -55°C to +180°C
- Good resistance to UV light, ozone and weathering
- Tinted, fluorescent and translucent colours, so fuel flow and bubbles stay visible
Typical uses
- Tank-to-carburettor fuel lines on nitro RC cars and trucks
- Glow fuel lines on model aircraft and helicopters
- Pressure (muffler) lines from exhaust to fuel tank
- Fuel lines on nitro model boats
- Colour-coding feed, return and pressure lines in the same model
Which one do I need?
| Choice | Best for |
|---|---|
| 10m coil | Servicing a few models or replacing lines through a season |
| 50m coil | Clubs, model shops and workshops fitting many models |
| Translucent or tinted | Seeing fuel level, flow and air bubbles in the line |
| Fluorescent | Making lines easy to spot and trace inside a busy chassis |
Technical drawing
Specification
| Material | Silicone rubber |
| Inside diameter (bore) | 2.3mm |
| Outside diameter | 5.5mm |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11.0 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Compression set (22 h at 175°C) | 16% |
| Operating temperature | -55°C to +180°C |
| Fuel compatibility | Methanol and nitro (glow) fuels; not suitable for petrol |
| Colours | Blue, red, green and purple tint; fluorescent green, orange, pink and yellow; translucent |
| Unit of sale | One continuous coil, 10m or 50m |
How much do I need?
A typical 1/8 or 1/10 nitro car uses about 300mm of fuel tubing for the feed and pressure lines together. Allow a little extra for each line so it can follow the chassis without tight bends. As a worked example, refitting 20 cars at 300mm each needs 6m, so a 10m coil covers that job with spare; a club or shop replacing lines on 100 or more models will find the 50m coil goes further.
Fitting tips
- Cut the tubing square with a sharp blade; a ragged end can leak air and upset the mixture.
- Push each end at least 5mm over the nipple so it cannot slip off with vibration.
- Route lines in gentle curves away from the exhaust, flywheel and moving linkages.
- Check lines at each service and replace any that have gone hard, cloudy or split.
- Never use this tubing for petrol – it will swell and break down.
Complete your project
- Solid Silicone Rubber Cord – 60 Shore A
- White Silicone Sponge Cord – Closed Cell – 10m Roll
- Silicone Round U Channel – 6.1mm x 6.3mm – 25m Roll
Questions
Can I use this silicone fuel line with petrol?
No. Silicone is made for methanol and nitro fuels; petrol attacks it, so use a petrol-rated line for petrol engines.
Will a 2.3mm bore fit my engine?
It suits the small fuel nipples used on most nitro car and glow aircraft engines. The soft 60° Shore A wall stretches over the nipple for a tight, leak-free fit.
Does the colour change how the tubing performs?
No. All nine colours share the same silicone, size and temperature range; the colour is only for visibility and colour-coding.
How hot can the fuel line get?
The silicone stays flexible from -55°C up to +180°C, which covers lines routed near a running engine, but keep them off the exhaust itself.
Is it one length or several pieces?
Each coil is one continuous length of 10m or 50m, so you can cut exactly what each model needs.
Need help choosing? Contact our team and we will be happy to help.
Product details
| SKU | IP-SFT-2.3X5.5-BLUTINT-10M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Fuel Tubing – 2.3mm Bore x 5.5mm OD – 10m or 50m Coil