Rubber & FoamSKU IP-SILP-12X10-B74D-BLACK
Silicone L Profile – 12mm x 10mm, Hard 80 Shore A – 25m Coil
This hard silicone L profile 12mm x 10mm is a solid, stepped angle section in 80 Shore A silicone, made to protect and seal exposed edges where a softer strip would squash or wear. It is sold as a 25m coil in a choice of seven colours.
At a glance
- Overall section 12mm wide x 10mm high
- Solid stepped legs: 12mm x 5mm base with an 8mm thick upright
- Hard 80 Shore A rubber angle trim that holds its shape under load
- Silicone rated from -50°C to +180°C
- Food-contact grade to FDA 21 CFR 177.2600 and EC 1935/2004; WRAS approved
- Seven colours, including translucent, for colour-coding and hygiene zones
Typical uses
- Heavy-duty edge protector on machine guards, enclosures and access panels
- Corner seal on oven, dryer and hot-cabinet doors
- Wear strips on food and drink processing equipment
- Hygienic edging in cleanrooms and laboratories
- Glazing and panel edge cushioning where a firm rubber angle is needed
Which one do I need?
| 12mm x 10mm silicone L | Choose it when |
|---|---|
| Thin wall, 60 Shore A | You want a light, flexible angle that wraps easily round panel edges |
| Firm, 70 Shore A | You need a balance of grip and impact resistance |
| Hard, 80 Shore A (this one) | The edge takes knocks, pressure or abrasion and must not deform |
Technical drawing
Specification
| Material | Silicone rubber |
| Section | 12mm x 10mm stepped L, solid |
| Leg thickness | 5mm (base) and 8mm (upright) |
| Hardness | 80 Shore A |
| Density | 1.20 g/cm³ |
| Tensile strength | 10 N/mm² |
| Elongation at break | 440% |
| Tear strength | 28 N/mm |
| Compression set (22 h at 175°C) | 78% |
| Rebound resilience | 54% |
| Temperature range | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | 25m coil |
How much do I need?
Measure every edge you want to cover and add about 5% for trimming and mitred corners. Example: a machine guard with four openings of 1.2m x 0.8m needs 4 x 4.0m = 16m, plus 5% = about 17m, so one 25m coil covers it with spare for repairs.
Fitting tips
- Clean and degrease the edge first; silicone grips best on a dry surface.
- Cut with a sharp knife against a straight edge for a square end; mitre corners at 45°.
- For a permanent fix, bond with a silicone adhesive sealant applied along the inside of the angle.
- Because the 80 Shore A grade is stiff, warm the coil to room temperature before fitting long runs.
Complete your project
- Silicone L Profile – 12mm x 10mm, Firm 70 Shore A
- Silicone L Profile – 12mm x 13mm Stepped Edge Protector
- Silicone T-Section Seal – 10mm x 10mm
Questions
How hard is 80 Shore A?
It is the firmest of the three 12mm x 10mm grades we list: flexible enough to coil but stiff enough to resist knocks and keep a crisp edge.
Is it food safe?
Yes. The silicone compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact and is WRAS approved.
Will it cope with oven or dryer heat?
It is rated for continuous use from -50°C to +180°C.
Is the section solid or hollow?
Solid. Both legs are solid silicone, 5mm and 8mm thick, so there is no channel to clip over a panel.
Can I order a different colour?
Choose from black, blue, green, red, translucent, white or yellow using the colour option.
Need help choosing? Contact our team with your edge thickness and application and we will point you to the right profile.
Product details
| SKU | IP-SILP-12X10-B74D-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 12mm x 10mm, Hard 80 Shore A – 25m Coil