Rubber & FoamSKU IP-SILP-15X10-SOFT-BLACK
Silicone L Profile – 15mm x 10mm, Soft 20 Shore A – 25m Coil
This soft silicone L profile 15mm x 10mm is a cushioning angle trim in a very flexible 20 Shore A grade, with 5mm walls on both legs, made to hug corners and exposed edges, soak up knocks and vibration and seal out dust and moisture. It is sold per 25m coil in a choice of seven colours.
At a glance
- Silicone L profile 15mm wide x 10mm high
- Even 5mm wall on both legs
- Soft 20 Shore A grade that stretches up to 1000%
- Food-contact (FDA, EC 1935/2004) and WRAS approved compound
- Works from -50°C to +180°C and resists UV, ozone and weather
- Seven colours for colour-coded edge protectors and corner seals
Typical uses
- Cushioning rubber angle trim on glass, sheet metal and panel edges
- Soft corner seals on doors, hatches and machinery enclosures
- Anti-vibration edge protector on food and drink processing equipment
- Seals in potable water equipment
- Corner guards in cleanrooms, laboratories and HVAC housings
Which one do I need?
| Profile | Best for |
| 15mm x 10mm soft (this one) | Uneven or delicate edges where a soft, conforming seal matters |
| 15mm x 10mm, 60 Shore A | Same size in a firmer grade that holds its shape on straight runs |
| 14mm x 10mm | Slightly narrower base on the same height |
| 15mm x 12mm | Same base with a taller 12mm upright |
Technical drawing
Specification
| Material | Silicone rubber |
| Profile | L section (angle) |
| Width (base) | 15mm |
| Height | 10mm |
| Wall thickness | 5mm |
| Hardness | 20° Shore A (soft) |
| Density | 1.11 g/cm³ |
| Tensile strength | 9 N/mm² |
| Elongation at break | 1000% |
| Tear strength | 27 N/mm |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | 25m coil |
Installation and care
Cut the coil to length with a sharp knife or shears. The soft grade grips well and can often be pressed into place by hand; for a permanent or watertight fit, bond it with a compatible silicone or polyurethane sealant. Wipe clean with warm soapy water; silicone needs no other maintenance.
Fitting tips
- Clean and degrease the edge before fitting so any sealant bonds fully.
- Lay the soft profile without stretching it, or it will creep back at the ends.
- Cut a few millimetres long and butt the ends together to avoid gaps.
- On long straight runs, a few dabs of sealant stop the soft grade lifting.
Complete your project
- Silicone L Profile – 15mm x 10mm, 60 Shore A – 25m Coil
- Silicone L Profile – 14mm x 10mm – 25m Coil
- Silicone L Profile – 15mm x 12mm – 25m Coil
Questions
Is this silicone L profile 15mm x 10mm the soft or firm grade?
This is the soft 20 Shore A grade. The same size in firmer 60 Shore A is listed separately.
Is it suitable for food areas?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Can this rubber angle trim be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so the profile keeps its shape and colour outside.
Can it be used with drinking water?
Yes, the material is WRAS approved for potable water applications.
How hot can it get?
The profile works continuously from -50°C to +180°C.
Need help choosing an edge protector or corner seal? Contact our team.
Product details
| SKU | IP-SILP-15X10-SOFT-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 15mm x 10mm, Soft 20 Shore A – 25m Coil