Rubber & FoamSKU IP-SILP-19X19X5-BLACK-10
Silicone L Profile – 19mm x 19mm, Heavy 14mm/5mm Section, 60 Shore A – 10m or 25m Coil
Price shown updates with the option you pick.
A heavy, near-solid silicone L profile: 19mm x 19mm overall, with a 14mm thick upright leg and a 5mm base leg. The result is a chunky corner buffer that soaks up knocks and still bends round curves, in a firm 60 Shore A grade that stays flexible from -50°C to +180°C. Sold as a continuous 10m or 25m coil in seven colours, held in UK stock.
At a glance
- Size: 19mm wide x 19mm high, equal-size L (angle) section
- Wall: 14mm upright, 5mm base, solid; leaves a 5mm x 14mm step that sits over the corner
- Material: 60 Shore A silicone rubber, 1.15 g/cm³, 11 N/mm² tensile, 550% elongation
- Temperature: -50°C to +180°C working range
- Compliance stated by the manufacturer: FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved, free from TSE/BSE-derived products and phthalates
- Colours: black, blue, green, red, translucent, white and yellow, all at the same price
- Supplied as: 10m coil (£75.00/m) or 25m coil (£39.60/m), cut to length yourself
Technical drawing
![]()
The orange dimensions are the manufacturer's. The 5mm ledge (19 − 14) and 14mm step (19 − 5) are worked out from them. Corners are square.
Specification
| Property | Value | Test method / note |
|---|---|---|
| Profile | L (angle) section, heavy solid wall | Manufacturer's drawing |
| Overall width (base leg) | 19 mm | Nominal |
| Overall height (upright leg) | 19 mm | Nominal |
| Upright wall thickness | 14 mm | Nominal |
| Base thickness | 5 mm | Nominal |
| Ledge width (inside) | 5 mm | Derived (19 − 14) |
| Step height (inside) | 14 mm | Derived (19 − 5) |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Coil length | 10 m or 25 m continuous | One coil per unit |
| Material | Silicone rubber | - |
| Hardness | 60 Shore A | DIN ISO 48-4 |
| Density | 1.15 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 11 N/mm² (11 MPa) | ISO 37 Type 1 |
| Elongation at break | 550 % | ISO 37 Type 1 |
| Tear strength | 26 N/mm (26 kN/m) | ASTM D624 B |
| Compression set | 31 % after 22 h at 175°C | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 59 % | ISO 4662 |
| Working temperature | -50°C to +180°C | Manufacturer's data |
| Environmental resistance | Ozone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation | Manufacturer's data |
| Colours | Black, blue, green, red, translucent, white, yellow | - |
Materials and compliance
The manufacturer's datasheet for this exact profile states that the compound meets:
- FDA 21 CFR 177.2600 (rubber articles for repeated food contact)
- EC 1935/2004 (EU food-contact materials framework)
- WRAS approved material (for use with drinking water)
- Free from TSE/BSE-derived products
- Free from phthalates
We list only the approvals the manufacturer states in writing for this product. If you need a declaration of conformity or a certificate for an audit, ask us before ordering.
How it fits
![]()
Typical uses
- Heavy corner buffers on benches, workstations, machine frames and trolleys
- Impact guards on the exposed edges of enclosures, cabinets and guards
- Protective edging on glass, sheet metal and composite panels
- Corner seals on machinery doors, hatches and HVAC housings
- Hygienic edging on food and drink processing equipment (FDA and EC 1935/2004 compound)
- Edges and seals in potable water equipment (WRAS approved material)
- Colour-coded corner guards for food zones, cleanrooms, laboratories and safety marking
Which 19 x 19mm silicone L profile do I need?
We sell two 19mm x 19mm silicone angles. They share the outside size but not the wall or hardness.
| Version | Walls | Hardness | Best for |
|---|---|---|---|
| Heavy section (this one) | 14mm upright, 5mm base, square corners | 60 Shore A | Firm, chunky corner buffers that take knocks |
| Soft section | 6mm upright, 3mm base, R4 rounded corner | 20 Shore A | Soft, cushioning edge caps and seals on uneven edges |
Other sizes: 21.6mm x 15mm, 5mm wall · 25.4mm x 19.1mm · 30mm x 30mm, 6mm wall
How much do I need?
Measure every edge you want to protect and add about 5% for cutting and joins. For example, the four vertical corners of a 2m tall machine enclosure need 4 x 2m = 8m, plus 5% = 8.4m, so one 10m coil covers it. Three enclosures (about 25m) are better served by a 25m coil, which also works out much cheaper per metre.
Fitting and care
- Clean and degrease the mounting faces. Silicone sealant bonds best to dry, oil-free metal, glass, wood or plastic.
- Run a bead of silicone or a compatible polyurethane sealant along both inside faces of the step, then press the profile onto the corner.
- Put the thick 14mm leg on the face that takes the knocks.
- Lay the profile without stretching it, or the ends will creep back and open the joints later.
- Cut with a sharp knife or fine-tooth saw in one stroke. Mitre at 45° where two runs meet at a corner.
- Clean with warm soapy water or your normal food-area cleaning routine.
Questions
Why is one leg so much thicker than the other?
The 14mm upright is the buffer: it is solid rubber that absorbs knocks. The 5mm base is the locating lip that sits on the top face. Together they leave a 5mm x 14mm step that fits over the corner.
Which way round does it fit?
The step sits over the corner, with the thick leg on the face that needs protecting. See the "How it fits" drawing above.
Does it need adhesive?
Yes, for anything permanent. An L profile does not clip on, so bond it with silicone sealant or a compatible polyurethane adhesive.
Can it be used in food areas?
Yes. The manufacturer states that the compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Is it suitable for drinking water equipment?
Yes. The material is WRAS approved.
How hot and cold can it go?
The working range is -50°C to +180°C. Compression set is 31% after 22 hours at 175°C, so it keeps its shape near ovens and hot plant.
Will it survive outdoors?
Yes. Silicone resists UV, ozone and weathering, so it will not crack or perish in sunlight.
How do I cut and join it?
A sharp knife or fine-tooth saw gives a clean square cut. Butt the ends together and seal them with a dab of silicone sealant, or mitre them at 45° for neat corners.
Is it in stock?
Yes. All seven colours are held in stock in 10m and 25m coils and dispatched from the UK.
Need help choosing a profile, or a quote for several coils? Contact our team or call +44 1282 277786.
Product details
| SKU | IP-SILP-19X19X5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 19mm x 19mm, Heavy 14mm/5mm Section, 60 Shore A – 10m or 25m Coil