Rubber & FoamSKU IP-SILP-20X25-BLACK-10
Silicone L Profile – 20mm x 25mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 20mm x 25mm is a lightweight, thin-walled angle trim with a 1mm wall, made to sit neatly over corners and panel edges where a slim, flexible edge protector or corner seal is wanted rather than a bulky one. It is sold per coil, in 10m or 25m lengths and a choice of seven colours.
At a glance
- Silicone L profile 20mm wide x 25mm high
- Slim 1mm wall for a neat, low-bulk finish
- 60° Shore A silicone rubber angle trim
- Food-contact (FDA, EC 1935/2004) and WRAS approved compound
- Works from -50°C to +180°C and resists UV, ozone and weather
- Seven colours, in 10m or 25m coils
Typical uses
- Light rubber angle trim on sheet metal, glass and panel edges
- Corner seals on enclosures, doors and HVAC housings
- Edge protector on food and drink processing equipment
- Seals in potable water equipment
- Colour-coded corner guards in cleanrooms and laboratories
Which one do I need?
| Profile | Best for |
| 20mm x 25mm, 1mm wall (this one) | Neat, flexible trim where low bulk matters more than impact cushioning |
| 40mm x 25mm | Same height with a much wider base face |
| 33mm x 33mm | Larger equal-leg corners |
| 30mm x 30mm, 6mm wall | Heavier walls for knocks and impact |
Technical drawing
Specification
| Material | Silicone rubber |
| Profile | L section (angle) |
| Width (base) | 20mm |
| Height | 25mm |
| Wall thickness | 1mm |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | Per coil, 10m or 25m |
Installation and care
Cut the coil to length with a sharp knife or shears. The thin wall makes it easy to press over an edge by hand; for a permanent or watertight fit, bond it with a compatible silicone or polyurethane sealant. Wipe clean with warm soapy water; silicone needs no other maintenance.
Fitting tips
- Clean and degrease the edge before fitting so any sealant bonds fully.
- Because the wall is only 1mm thick, run a thin bead of sealant along the inside to stop it lifting on long runs.
- Cut a few millimetres long and butt the ends together to avoid gaps.
- Choose the 25m coil for long runs to keep joints to a minimum.
Complete your project
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 33mm x 33mm – 10m or 25m Coil
- Silicone L Profile – 35mm x 18mm – 10m or 25m Coil
Questions
How thick is the wall on this silicone L profile 20mm x 25mm?
Both legs are 1mm thick, which keeps the trim light and flexible.
Is it suitable for food areas?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Can this rubber angle trim be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so the profile keeps its shape and colour outside.
Can it be used with drinking water?
Yes, the material is WRAS approved for potable water applications.
Which coil length should I buy?
Measure the total run and add about 5% for cutting; the 25m coil suits longer runs with fewer joins.
Need help choosing an edge protector or corner seal? Contact our team.
Product details
| SKU | IP-SILP-20X25-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 20mm x 25mm – 10m or 25m Coil