Rubber & FoamSKU IP-SILP-35X18-BLACK-10
Silicone L Profile – 35mm x 18mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 35mm x 18mm is an unequal-leg rubber angle trim with a 1.5mm wall, made to cover and protect exposed edges and corners on panels, enclosures and equipment. It is sold as one continuous coil of 10m or 25m, in seven colours.
At a glance
- Unequal L section: 35mm leg and 18mm leg, 1.5mm wall
- Food-contact grade silicone (FDA 21 CFR 177.2600 and EC 1935/2004) and WRAS approved
- Working temperature -50°C to +180°C
- Good resistance to UV, ozone and weathering for outdoor use
- Seven colours: black, blue, green, red, translucent, white and yellow
- One continuous 10m or 25m coil with no joins
Typical uses
- Edge protector and corner trim for sheet metal, glass and panel edges
- Rubber angle trim on enclosures, cabinets and HVAC units
- Corner seal on equipment in food and beverage processing areas
- Potable water and public water supply installations
- Cleanrooms, laboratories and general manufacturing
Which one do I need?
| Profile | Best for |
|---|---|
| Silicone L profile 33mm x 33mm | Equal legs for square corners |
| Silicone L profile 35mm x 18mm (this item) | Wide face cover with a shorter return leg |
| Silicone L profile 40mm x 25mm | Wider face and a deeper 25mm return |
| Silicone L profile 39mm x 36mm | Near-equal legs for large corners |
Technical drawing
Specification
| Material | Silicone rubber |
| Profile | Unequal L (angle) |
| Leg 1 | 35mm |
| Leg 2 | 18mm |
| Wall thickness | 1.5mm |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Compression set (22h at 175°C) | 31% |
| Rebound resilience | 59% |
| Temperature range | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure every edge you want to cover and add them together, then allow about 5% for trimming and cutting mitres. Example: four cabinet top edges of 1.2m and four upright edges of 1.8m make 12m, plus 5% = 12.6m, so a 25m coil covers it with plenty left for a second unit, while a 10m coil would fall short.
Fitting tips
- Clean and degrease the edge first so the profile sits flat.
- Place the 35mm leg on the face you want covered most and the 18mm leg on the return.
- For a permanent or watertight fit, bond the inside faces with a silicone or polyurethane sealant.
- Cut with a sharp knife or scissors and mitre corners at 45° for a neat finish.
Complete your project
- Silicone L Profile – 33mm x 33mm – 10m or 25m Coil
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 39mm x 36mm – 10m or 25m Coil
Questions
Can this silicone angle trim be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits exposed outdoor edges.
Is it suitable for drinking water?
Yes. The silicone is WRAS approved for use with potable water.
Can I use it in a food factory?
Yes. The material meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Does it need adhesive?
On many edges it can sit in place without glue. For a secure or sealed fit, bond it with a silicone or polyurethane sealant.
How do I choose a colour?
Colour does not change the performance. Pick black or white for a discreet finish, or a bright colour to mark hazards or identify lines.
Need help choosing? Contact our team with your application and we will point you to the right profile.
Product details
| SKU | IP-SILP-35X18-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 35mm x 18mm – 10m or 25m Coil