Rubber & FoamSKU IP-SILP-31.5X5.5-BLACK-10
Silicone L Profile – 31.5mm x 5.5mm – 10m or 25m Roll
Price shown updates with the option you pick.
This silicone L profile 31.5mm x 5.5mm combines a wide, thin 1mm flange with a solid 12mm-wide lip, so it lies flat on a surface and forms a neat, low stop or seal along an edge. It is sold per roll, in 10m or 25m lengths, in seven colours.
At a glance
- Low-profile rubber angle trim: 31.5mm wide by 5.5mm high overall
- 1mm flexible flange with a solid 12mm x 5.5mm lip along one edge
- Silicone, 60° Shore A, food-contact compliant (FDA 21 CFR 177.2600, EC 1935/2004)
- WRAS approved for potable water applications
- Working temperature -50°C to +180°C; resists UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow
Typical uses
- Low edge stop or drip lip on panels, trays and worktops
- Flat edge seal under covers, lids and access panels
- Hygienic edge trim on food and drink processing equipment
- Cleanroom and laboratory edge finishing
- Transport and marine panel edging
Which one do I need?
| Profile | Character | Best for |
|---|---|---|
| 31.5mm x 5.5mm (this profile) | Wide 1mm flange, 12mm lip | Flat-lying stops, drip lips and low edge seals |
| 30mm x 11.5mm | Taller upstand | Edges that need more height on the return |
| 35mm x 12mm | 5mm to 5.5mm wall | Heavy-duty angle protection on wide faces |
| 20mm x 5mm | 2mm to 5mm wall | Narrower faces where 31.5mm is too wide |
Technical drawing
Specification
| Profile | L (angle), flanged |
| Overall width | 31.5mm |
| Overall height | 5.5mm |
| Lip width | 12mm |
| Flange thickness | 1mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | Per roll, 10m or 25m |
How much do I need?
Add up every edge to be trimmed and allow about 2% for cutting. Example: a 12m run fits on one 25m roll with 13m to spare for a second job, or on two 10m rolls if you prefer less left over. Each roll is one continuous length, so a 25m roll avoids joins on long runs.
Fitting tips
- Clean, dry and degrease the surface before fitting or bonding.
- Lay the 1mm flange flat on the surface with the 12mm lip on the edge you want raised.
- Bond the flange with a compatible silicone or polyurethane sealant for a permanent or watertight fit.
- Cut with a sharp knife against a straight edge for clean, square ends.
Complete your project
- Silicone L Profile – 30mm x 11.5mm
- Silicone L Profile – 35mm x 12mm, 5mm to 5.5mm Wall
- Silicone L Profile – 20mm x 5mm, 2mm to 5mm Wall
Data sheet
Download the technical data sheet (PDF)
Questions
Is this flat silicone edge trim suitable for drinking water applications?
Yes. The silicone is WRAS approved for potable water use.
Is it safe for food contact?
Yes. It meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact applications.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
How do I fix it in place?
Bond the 1mm flange with a compatible silicone or polyurethane sealant; for light-duty use it can be held under a cover or panel edge.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-SILP-31.5X5.5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 31.5mm x 5.5mm – 10m or 25m Roll