Rubber & FoamSKU IP-SILP-35X12X5-BLACK-10
Silicone L Profile – 35mm x 12mm, 5mm to 5.5mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 35mm x 12mm is a low, wide rubber angle with a thick 5mm to 5.5mm wall, made to cap and protect square edges where a broad face needs covering but only a short return is wanted. It is sold per coil, in a 10m or 25m length, in seven colours.
At a glance
- Unequal angle: 35mm wide face and 12mm short return
- Heavy 5mm to 5.5mm wall for knock and wear resistance
- 70 Shore A silicone, firm but flexible
- Works from -50°C to +180°C
- Material meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and is WRAS approved
- Seven colours for colour-coding zones and equipment
Typical uses
- Edge protection on food and drink processing machinery and guards
- Corner trim on stainless cabinets, hoods and enclosures
- Protecting the edges of panels around ovens and hot equipment
- Colour-coded edging in cleanrooms, labs and hygiene zones
- Finishing exposed edges in potable water installations
Which one do I need?
| Profile | Best for |
|---|---|
| 35mm x 12mm (this product) | Wide flat faces with a short return, where a low profile is needed |
| 35mm x 18mm | Same face width with a deeper 18mm return for a stronger grip on the edge |
| 40mm x 25mm | Larger corners needing more cover on both faces |
| 33mm x 33mm | Equal-leg cover on square corners |
Technical drawing
Specification
| Width | 35mm |
| Height | 12mm |
| Wall thickness | 5mm to 5.5mm |
| Hardness | 70° Shore A |
| Density | 1.18 g/cm³ |
| Tensile strength | 11.3 N/mm² |
| Elongation at break | 530% |
| Tear strength | 31 N/mm |
| Temperature range | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600, EC 1935/2004 |
| Water | WRAS approved |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming. Four guards with 1.8m of exposed edge each need 7.2m, so one 10m coil covers the job; ten similar guards (about 18m) suit the 25m coil.
Fitting tips
- Clean and degrease the edge first; silicone grips best on dry, oil-free metal
- Seat the inside corner of the L tight onto the corner of the panel before pressing the faces down
- For a permanent fit, bond both faces with a silicone adhesive sealant
- Cut with a sharp blade against a straight edge for a clean, square end; mitre at 45° for neat corners
Complete your project
- Silicone L Profile – 35mm x 18mm – 10m or 25m Coil
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 55mm x 30mm – 10m or 25m Coil
Questions
Is this rubber angle trim suitable for food areas?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, so it can be used on food and drink processing equipment.
Which way round does the profile fit?
The 35mm leg covers the main flat face and the 12mm leg turns down over the edge. Choose the face that takes the knocks for the wide leg.
Can it be used on hot equipment?
It works continuously from -50°C to +180°C, which suits oven surrounds, hoods and other warm equipment.
Will it stay on without glue?
On a clean edge it sits in place, but it is an open angle rather than a clip-on channel, so we recommend a silicone adhesive where it will be knocked or washed down.
Not sure which size suits your edge? Contact our team with the panel thickness and we will help you choose.
Product details
| SKU | IP-SILP-35X12X5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 35mm x 12mm, 5mm to 5.5mm Wall – 10m or 25m Coil