Rubber & FoamSKU IP-SLPR-34.5X20-BLACK-10
Silicone L Profile – 34.5mm x 20mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 34.5mm x 20mm is a sturdy unequal-leg rubber angle with a solid 5mm wall, made to protect exposed edges, finish panel corners and help seal enclosures. It is sold as one continuous coil of 10m or 25m, in seven colours.
At a glance
- Unequal L section: 34.5mm leg and 20mm leg, solid 5mm wall
- Food-contact grade silicone (FDA 21 CFR 177.2600 and EC 1935/2004) and WRAS approved
- Working temperature -50°C to +180°C
- Good resistance to UV, ozone and weathering
- Seven colours: black, blue, green, red, translucent, white and yellow
- Free from TSE/BSE-derived ingredients and phthalates
Typical uses
- Impact-resistant edge protector for glass, sheet metal and panels
- Corner seal on machinery enclosures, doors and HVAC units
- Edge trim on food and beverage processing equipment
- Potable water installations
- Cleanroom and laboratory edge finishing
Which one do I need?
| Profile | Best for |
|---|---|
| Silicone L profile 35mm x 18mm | Similar size with a thin 1.5mm wall, more flexible |
| Silicone L profile 34.5mm x 20mm (this item) | Similar size with a solid 5mm wall for knocks |
| Silicone L profile 33mm x 33mm | Equal legs for square corners |
| Silicone L profile 40mm x 25mm | Wider face and a deeper return |
Technical drawing
Specification
| Material | Silicone rubber, free from TSE/BSE-derived ingredients and phthalates |
| Profile | Unequal L (angle) |
| Leg 1 | 34.5mm |
| Leg 2 | 20mm |
| Wall thickness | 5mm |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Temperature range | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Add up the length of every edge you want to cover and allow about 5% for trimming and mitres. Example: a machine guard with 8m of exposed edge needs 8.4m, so a 10m coil is enough; two guards (16.8m) need the 25m coil.
Fitting tips
- Clean and degrease the edge first so the profile sits flat.
- On low-stress edges the profile can be pushed on without adhesive.
- For a permanent or watertight fit, bond the inside faces with a silicone or polyurethane sealant.
- The 5mm wall is firm: cut it with a sharp blade and mitre corners at 45°.
Complete your project
- Silicone L Profile – 35mm x 18mm – 10m or 25m Coil
- Silicone L Profile – 33mm x 33mm – 10m or 25m Coil
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
Questions
Can this silicone angle trim be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits exposed outdoor edges.
Is it suitable for drinking water?
Yes. The silicone is WRAS approved for use with potable water.
Can I use it in a food factory?
Yes. The material meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Does it need adhesive?
On many edges it can sit in place without glue. For a secure or sealed fit, bond it with a silicone or polyurethane sealant.
How flexible is it?
At 60 Shore A with 550% elongation it follows gentle curves, though the 5mm wall is firmer than thin-wall profiles.
Need help choosing? Contact our team with your application and we will point you to the right profile.
Product details
| SKU | IP-SLPR-34.5X20-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 34.5mm x 20mm – 10m or 25m Coil