Rubber & FoamSKU IP-SILP-47.5X23.3-BLACK-10
Silicone L Profile – 47.5mm x 23.3mm, 2mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 47.5mm x 23.3mm is a wide, unequal-leg angle extrusion with a 2mm wall, made to sit over exposed corners and panel edges as a flexible guard, seal or finishing trim. It is sold by the coil, in a 10m or 25m length.
At a glance
- Unequal angle: one 47.5mm leg and one 23.3mm leg, 2mm wall throughout
- Wide leg covers a broad face of the corner; short leg wraps the return edge
- 60 Shore A silicone – flexible enough to follow slightly out-of-square corners
- Works from -50°C to +180°C and resists UV, ozone and weathering
- FDA compliant and WRAS approved compound for food and potable water areas
- Seven colours for colour coding zones or matching equipment
Typical uses
- Corner guards on stainless and powder-coated cabinets, enclosures and machine guards
- Edge protection for glass, sheet metal and composite panels
- Flexible angle seals around doors, hatches and access panels
- Clean, wipeable corner finishing in food production and laboratories
Which one do I need?
Choose by the face you need to cover and the wall thickness you want. Nearby sizes in our range:
| Profile | Best for |
|---|---|
| Silicone L 46mm x 20mm | Slightly narrower faces where a lower return leg is preferred |
| Silicone L 47.5mm x 23.3mm (this profile) | Wide face plus a medium 23.3mm return, light 2mm wall |
| Silicone L 50mm x 19mm | Thin 1.3mm wall for light covering where flexibility matters most |
| Silicone L 51mm x 26mm | Heavy 6.3mm wall for impact-prone corners |
Technical drawing
Specification
| Profile | Unequal angle (L) |
| Long leg | 47.5mm |
| Short leg | 23.3mm |
| Wall thickness | 2mm |
| Material | Silicone rubber, 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA compliant, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil of the chosen length (10m or 25m) |
How much do I need?
Measure every corner run and add about 5% for trimming. Example: four 1.8m vertical corners plus four 0.6m top edges = 9.6m, about 10.1m with allowance – a 25m coil, or a 10m coil if fitted carefully.
Fitting tips
- Clean and degrease the corner first; silicone only bonds well to clean, dry surfaces
- Put the 47.5mm leg on the face that needs the most cover and the 23.3mm leg on the return
- Cut with a sharp knife against a straight edge for square, tidy ends
- For a permanent or watertight fit, bond with a silicone or polyurethane sealant rather than standard contact adhesive
Complete your project
- Silicone L Profile – 46mm x 20mm
- Silicone L Profile – 51mm x 26mm, 6.3mm Wall
- Silicone L Profile – 54mm x 17mm
Questions
Which leg is which?
The long leg is 47.5mm and the short leg is 23.3mm, both measured to the outside of the angle, with a 2mm wall.
Is it suitable for food areas?
Yes. The compound is FDA compliant, so it can be used for suitable food processing and handling applications.
Can it be used with drinking water?
The material is WRAS approved for suitable potable water and public water supply applications.
Does it need adhesive?
On many corners it can simply be positioned over the edge. For a secure or watertight installation, bond it with a compatible silicone or polyurethane sealant.
Not sure which size suits your edge? Contact our team with the panel thickness and corner size and we will help you choose.
Product details
| SKU | IP-SILP-47.5X23.3-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 47.5mm x 23.3mm, 2mm Wall – 10m or 25m Coil