Rubber & FoamSKU IP-SILP-5X6-BLACK
Silicone L Profile – 5mm x 6mm – 25m Coil
A compact, firm silicone L profile measuring 5mm wide x 6mm high. It caps and seals small outside corners and thin edges on food, pharmaceutical, water and general engineering equipment. The section is solid, with a 2.0mm upright and a 3.5mm base. It is made from hard 80 Shore A silicone so the small section keeps its square shape, and it comes as a continuous 25m coil in seven colours. All colours are held in stock for same-day dispatch.
At a glance
- Size: 5.0mm wide x 6.0mm high, solid L section
- Walls: 2.0mm upright, 3.5mm base. The inside step is 3.0mm x 2.5mm.
- Material: silicone rubber, 80 Shore A, rated -50°C to +180°C
- Compliance: FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved material
- Colours: black, blue, green, red, translucent, white and yellow
- Supplied as: one 25m coil, £675.00 inc VAT (£27.00 per metre)
Technical drawing
![]()
Nominal dimensions in mm. Tolerances are to ISO 3302-1 class E2 for extruded solid rubber sections.
Specification
| Property | Value | Test method |
|---|---|---|
| Profile type | Solid L (angle) section | – |
| Overall width | 5.0 mm | Nominal, ISO 3302-1 E2 |
| Overall height | 6.0 mm | Nominal, ISO 3302-1 E2 |
| Upright (leg) thickness | 2.0 mm | Nominal, ISO 3302-1 E2 |
| Base thickness | 3.5 mm | Nominal, ISO 3302-1 E2 |
| Inside step (derived) | 3.0 mm wide x 2.5 mm deep | Calculated from the dimensions above |
| Coil length | 25 m continuous | – |
| Material | Silicone rubber | – |
| Hardness | 80 Shore A | DIN ISO 48-4 |
| Density | 1.20 g/cm³ | DIN EN ISO 1183-1 method A |
| Tensile strength | 10 N/mm² (10 MPa) | ISO 37 type 1 |
| Elongation at break | 440 % | ISO 37 type 1 |
| Tear strength | 28 N/mm | ASTM D624 die B |
| Compression set, 22 h at 175°C | 78 % | DIN ISO 815-1 type B, method A |
| Rebound resilience | 54 % | ISO 4662 |
| Operating temperature | -50°C to +180°C | – |
| Environmental resistance | Ozone, UV, oxidation, weathering, cosmic and ionising radiation, corona discharge | – |
| Dimensional tolerance | ISO 3302-1 class E2 | ISO 3302-1:2014 |
| Colours | Black, blue, green, red, translucent, white, yellow | – |
| SKU | IP-SILP-5X6-[COLOUR] | – |
All values are for this profile's silicone compound.
Download the technical data sheet (PDF)
Materials and compliance
- FDA 21 CFR 177.2600: the compound complies with the US rule for rubber articles in repeated food contact.
- EC 1935/2004: the compound complies with the EU framework regulation for food-contact materials.
- WRAS approved material: suitable for potable water and public water supply applications.
- Free from TSE/BSE-derived products and free from phthalates.
Food-contact and water approvals cover the material. Check that your finished assembly meets your own process requirements.
Typical uses
- Protecting and sealing small outside corners on machine guards, enclosures and HVAC units
- Edge trim for glass, thin sheet metal and panels
- Small corner seals on doors, hatches and frames
- Food, beverage and pharmaceutical processing equipment
- Potable water and public water supply equipment
- Cleanrooms and laboratories, where a smooth, wipe-clean edge is needed
- Classic cars, caravans, motorhomes and rail interiors
- Colour coding: use red, blue, green or yellow to mark hygiene zones or hazard edges
How it fits
![]()
The inside step of the L sits on the corner. It covers 2.5mm of one face and 3.0mm of the other, with 2.0mm and 3.5mm of silicone over them.
- Clean and degrease the edge first.
- The 80 Shore A grade is firm and does not grip on its own. For a permanent or watertight joint, bed it in a compatible silicone or polyurethane adhesive sealant.
- Lay it in relaxed, without stretching. Cut slightly long, then trim.
- Cut with a sharp knife or shears. Mitre at 45° for neat closed corners.
Which one do I need?
| Need | Suggested profile |
|---|---|
| Small, firm corner cap that holds its shape | This 5mm x 6mm silicone L profile, 80 Shore A |
| Small, soft, flexible angle trim | Silicone L profile 5mm x 3mm, 40 Shore A |
| Very thin edge trim | Silicone L profile 3mm x 1mm |
| Slightly larger small angle | Silicone L profile 6.2mm x 5.2mm |
| Larger section with 10mm legs | Silicone L profile 10mm x 10mm |
How much do I need?
Measure every edge you want to cover and add about 5% for cuts and mitres. For example, edging four inspection doors of 400mm x 600mm needs 4 x 2.0m = 8m, plus 5% = 8.4m. One 25m coil covers that job almost three times. At £27.00 per metre, a full coil is the most economical way to buy.
Frequently asked questions
How does it fit onto an edge?
Seat the inside step of the L over an outside corner. It wraps 2.5mm onto one face and 3.0mm onto the other. The hard 80 Shore A grade holds its shape but does not clip on, so bond it with silicone or polyurethane sealant.
What size edge or corner does it suit?
It suits any 90° outside corner. The step covers 3.0mm x 2.5mm, so it gives a neat finish on panel edges and frame corners where a slim cap is wanted. Overall it adds 5mm x 6mm to the corner.
Is it food safe?
Yes. The compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food-contact use, and it is free from phthalates and TSE/BSE-derived products.
Can it be used near drinking water?
Yes. The material is WRAS approved for potable water applications.
What temperatures can it take?
It works continuously from -50°C to +180°C. It also resists UV, ozone and weathering, so it is suitable outdoors.
Why 80 Shore A rather than a softer silicone?
A harder grade is stiffer, so a small 5 x 6mm section stays square and resists knocks on exposed corners. If you need something that bends easily around tight curves, choose a 40 Shore A profile instead.
How do I cut and join it?
Cut it with a sharp knife or shears on a cutting board. Mitre corners at 45° and bond the joint with a silicone adhesive sealant. Do not join it with standard cyanoacrylate glues: silicone does not bond well without a silicone primer.
Is it in stock, and how is it supplied?
Yes. All seven colours are held in stock as continuous 25m coils, priced per coil.
Need help choosing a silicone L profile? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SILP-5X6-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 5mm x 6mm – 25m Coil