Rubber & FoamSKU IP-SILP-10X7.9-BLACK
Silicone L Profile – 10mm x 7.9mm – 25m Coil
This silicone L profile, 10mm x 7.9mm, is a compact angle extrusion for protecting and sealing light-gauge panel edges, glass and corners on food, pharmaceutical and general industrial equipment. It has thin 1.5mm to 2mm walls, is made from 50 Shore A silicone, and is sold as a 25m coil in seven colours.
At a glance
- Silicone L profile 10mm wide x 7.9mm high
- Thin-wall angle section, 1.5mm to 2mm thick
- 50 Shore A silicone rubber, flexible from -50°C to +180°C
- Food-contact compliant (FDA 21 CFR 177.2600) and WRAS approved
- Seven colours: black, blue, green, red, translucent, white and yellow
- Rubber angle trim and corner seal supplied as a continuous 25m coil
Typical uses
- Edge protection on machinery enclosures, guards and HVAC panels
- Corner seals on food and beverage processing equipment
- Silicone edge trim for glass, sheet metal and light panels
- Seals in potable water and public water supply equipment
- Edge finishing in cleanrooms and laboratories
- Sealing on caravans, motorhomes and classic vehicles
Which one do I need?
| Need | Suggested profile |
| Light edge trim with a near-equal angle, about 8mm upstand | This 10mm x 7.9mm silicone L profile |
| Same 10mm base but a lower, flatter upstand | Silicone L profile 10mm x 5mm |
| Smaller, discreet angle seal | Silicone L profile 7.7mm x 7.1mm or 6.2mm x 5.2mm |
| Larger section for wider edges | Silicone L profile 12.5mm x 7.5mm |
Technical drawing
Specification
| Material | Silicone rubber |
| Size | 10mm wide x 7.9mm high |
| Wall thickness | 1.5mm to 2mm |
| Hardness | 50 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 12 N/mm² |
| Elongation at break | 640% |
| Compression set (22 h at 175°C) | 34% |
| Tear strength | 27 N/mm |
| Rebound resilience | 58% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One 25m coil |
Download the technical data sheet (PDF)
How much do I need?
Measure every edge to be covered and add about 5% for trimming and mitres. Example: edging the four sides of six 600mm x 900mm guard panels needs 6 x 3.0m = 18m, plus 5% = 18.9m, so one 25m coil covers the job with spare.
Fitting tips
- Clean and degrease the edge before fitting.
- Seat the 10mm leg flat on the panel face and the 7.9mm leg against the edge.
- For light edge protection it can be pushed into place; for a permanent or watertight seal, bond with a silicone or polyurethane adhesive sealant.
- Lay the profile in relaxed, without stretching, and cut to length afterwards.
- Mitre corners with a sharp blade for a neat, closed joint.
Complete your project
- Silicone L Profile – 10mm x 5mm – 25m Coil
- Silicone L Profile – 7.7mm x 7.1mm – 25m Coil
- Silicone L Profile – 12.5mm x 7.5mm – 25m Coil
Questions
Is this silicone angle trim safe for food contact?
Yes. The compound meets FDA 21 CFR 177.2600 for food-contact use.
Can it be used near drinking water?
Yes, the material is WRAS approved for potable water applications.
Will it cope with heat and outdoor use?
It stays flexible from -50°C to +180°C and resists UV, ozone and weathering.
Can I choose a colour?
Yes. Seven colours are offered, useful for colour coding lines or hygiene zones.
Does it need adhesive?
Light edge protection can be push-fitted; use a compatible adhesive for a permanent or watertight seal.
Need help choosing a silicone L profile? Contact our team for advice.
Product details
| SKU | IP-SILP-10X7.9-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 10mm x 7.9mm – 25m Coil