Rubber & FoamSKU IP-SRUC-10X10-BLACK
Silicone Round U Channel – 10mm x 10mm for 4mm Edges – 25m Coil
A compact, heavy-wall silicone edge trim for 4 mm panels. This round U channel is 10 mm wide and 10 mm tall, with a 4 mm slot that grips 6 mm down each face of the edge. Solid 3 mm walls and a 4 mm rounded base give a firm, cushioned bumper on sheet metal, glass, polycarbonate and composite panels. It is made from 60 Shore A silicone, which works continuously from −50 °C to +180 °C. The compound is FDA 21 CFR 177.2600 compliant and WRAS approved, so it suits food lines, hygienic enclosures and water equipment.
Each 25 m coil comes in one of seven colours: black, blue, green, red, translucent, white or yellow. Use them to colour-code hygiene zones or to match a finish. Each coil costs £675.00 inc VAT, about £27.00 per metre. Held in stock in the UK.
At a glance
- Fits 4 mm edges: 4 mm slot, 6 mm grip depth
- Heavy section: 3 mm side walls and a 4 mm solid base with a full R5 round back
- Wide temperature range: −50 °C to +180 °C continuous
- Food and water approvals: FDA 21 CFR 177.2600, EC 1935/2004 and WRAS-approved material
- Weather-proof: resists ozone, UV, oxidation and weathering
- 7 colours, 25 m continuous coil, cut to length on site
Technical drawing
![]()
The profile is drawn to scale. All dimensions are nominal, in mm, with tolerances to ISO 3302-1:2014 Class E2.
Specifications
| Property | Value | Test method / note |
|---|---|---|
| Profile | Round-back U channel (edge trim) | – |
| Overall width | 10.0 mm | Nominal |
| Overall height | 10.0 mm | Nominal |
| Slot (channel) width | 4.0 mm | Nominal |
| Slot depth (grip depth) | 6.0 mm | Nominal |
| Wall thickness | 3.0 mm each side | Nominal |
| Base thickness under slot | 4.0 mm | Calculated: 10 − 6 |
| Back profile | Full round, R5 (Ø10) | From drawing |
| Fits panel / edge thickness | 4 mm | Supplier fitting guide |
| Coil length | 25 m continuous | – |
| Dimensional tolerance | ISO 3302-1:2014 Class E2 | ISO 3302-1 |
| Material | Silicone rubber (VMQ) | – |
| Hardness | 60 ° Shore A | DIN ISO 48-4 |
| Density | 1.15 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 11 N/mm² (MPa) | ISO 37 Type 1 |
| Elongation at break | 550 % | ISO 37 Type 1 |
| Tear strength | 26 N/mm | ASTM D 624 B |
| Compression set (22 h at 175 °C) | 31 % | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 59 % | ISO 4662 |
| Operating temperature | −50 °C to +180 °C continuous | – |
| Environmental resistance | Ozone, UV, oxidation, weathering, ionising and cosmic radiation, corona discharge | – |
| Colours | Black, Blue, Green, Red, Translucent, White, Yellow | Same profile and compound in every colour |
| Approx. weight | about 75 g/m (about 1.9 kg per 25 m coil) | Calculated from cross-section area and density |
Materials and compliance
The manufacturer's data sheet for this profile states that the silicone compound is:
- FDA compliant to 21 CFR 177.2600 (rubber articles for repeated food contact)
- Compliant with EC 1935/2004 (materials intended to contact food)
- WRAS approved material (drinking water)
- Free from TSE/BSE by-products
- Free from phthalates
Certificates of conformity are available on request. Ask when you order.
Typical applications
- Edge guards on 4 mm polycarbonate, acrylic and glass machine guards and food-line screens
- Protecting sharp sheet-metal edges on enclosures, hatches, oven and dryer panels
- Cushioning glass panes or glazing panels in frames and display cabinets
- Colour-coded edging in hygienic and food processing areas
- Anti-rattle and vibration cushioning between clamped panels
- Trim on potable water equipment where a WRAS-approved material is required
Fitting the channel
![]()
- Deburr the edge and wipe it clean and dry.
- Start at one end and press the slot over the edge by hand. A rubber mallet helps on long runs.
- Work along the edge until the panel is seated at the bottom of the slot.
- Cut to length with a sharp knife or snips, leaving it slightly long so the ends butt tightly.
- For a permanent or watertight fit, run a bead of silicone sealant or a compatible silicone or polyurethane adhesive in the slot first.
Frequently asked questions
What thickness of panel does it fit?
It is made for 4 mm edges. The 4 mm slot grips a 4 mm sheet firmly. For 3 mm sheet, bond it in with silicone sealant. Panels thicker than about 4.5 mm need a wider channel.
How much of the panel face does it cover?
The slot is 6 mm deep, so it covers 6 mm down each face. The rounded 4 mm solid base sits beyond the edge as a bumper.
Is it food safe?
Yes. The compound is stated as FDA 21 CFR 177.2600 and EC 1935/2004 compliant, so it suits food processing equipment and guards. The lighter colours and the translucent option make contamination easy to spot.
What temperatures can it handle?
It works continuously from −50 °C to +180 °C, so it suits freezer doors, ovens, dryers and outdoor equipment. It stays flexible at the cold end and does not melt or go brittle at the hot end.
Can I use it outdoors?
Yes. Silicone resists UV, ozone and weathering far better than most organic rubbers, so it will not crack or perish in sunlight.
How do I cut and join it?
Cut it square with a sharp knife or snips. For corners, either bend it round (it follows gentle radii easily) or mitre two lengths at 45° and butt them together. Joints can be bonded with a silicone RTV sealant or a cyanoacrylate adhesive with a silicone primer.
Is it the same in every colour?
Yes. All seven colours share the same profile, compound and approvals. Only the pigment changes.
Can I buy less than a 25 m coil, or a different size?
The listing price is for a full 25 m coil. For cut lengths, bulk quantities or other sizes, contact sales@industrial-polymers.co.uk or call +44 1282 277786.
Related profiles
- Silicone Round U Channel 6.1 x 10 mm for 2.1 mm edges
- Silicone Round U Channel 9 x 19.5 mm for 5 mm edges
- TPE Square U Channel 10 x 10 mm for 6 mm panels
Data sheet
Product details
| SKU | IP-SRUC-10X10-BLACK |
|---|---|
| Weight | 4.41 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 10mm x 10mm for 4mm Edges – 25m Coil