Rubber & FoamSKU IP-SRUC-9X25-BLACK-10
Silicone Round U Channel – 9mm x 25mm, 6mm Slot 16mm Deep – for 6mm Edges – 10m or 25m Coil
Price shown updates with the option you pick.
A deep, slim edge trim for 6mm panels: the 9mm x 25mm silicone round U channel has a 6mm slot that runs 16mm down each face of the sheet, then closes over the edge with a solid, fully rounded 9mm base. Its 1.5mm side walls keep it neat and flexible, while the thick round base takes the knocks. The 60 Shore A silicone works from -50°C to +180°C and resists UV, ozone and washdown. Choose a 10m or 25m coil in any of seven colours.
At a glance
- 9mm wide x 25mm high, R4.5 fully rounded solid base
- 6mm wide slot, 16mm deep, with a flat slot floor
- 1.5mm side walls and a 9mm thick base: slim on the faces, well cushioned on the edge
- Silicone rubber, 60 Shore A, -50°C to +180°C
- Compound stated as FDA 21 CFR 177.2600, EC 1935/2004 and WRAS approved
- Black, blue, green, red, translucent, white or yellow
- In stock: 10m coil £750.00 (£75.00/m) or 25m coil £990.00 (£39.60/m), prices inc VAT
Technical drawing
![]()
Cross-section drawn to scale. Nominal dimensions in mm; tolerance ISO 3302-1:2014 Class E2.
Specification
| Property | Value | Test method / note |
|---|---|---|
| Profile | Round-base U channel (edge trim) | - |
| Overall width | 9 mm | Nominal |
| Overall height | 25 mm | Nominal |
| Slot (channel) width | 6 mm | Nominal |
| Slot depth | 16 mm | Nominal, from supplier drawing |
| Side wall thickness | 1.5 mm | Nominal |
| Base thickness | 9 mm | Calculated: 25 mm height less 16 mm slot |
| Base shape | Fully rounded (R4.5), flat slot floor | From supplier drawing |
| Fits panel / edge | 6 mm | - |
| Dimensional tolerance | ISO 3302-1:2014 Class E2 | ISO 3302-1 |
| Material | Silicone rubber | - |
| Hardness | 60 Shore A | DIN ISO 48-4 |
| Density | 1.15 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 11 N/mm² (MPa) | ISO 37 Type 1 |
| Elongation at break | 550 % | ISO 37 Type 1 |
| Tear strength | 26 N/mm | ASTM D 624 B |
| Compression set (22 h at 175°C) | 31 % | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 59 % | ISO 4662 |
| Working temperature | -50°C to +180°C | - |
| Environmental resistance | Ozone, UV, oxidation, weathering, ionising radiation, corona discharge | - |
| Approx. weight | About 0.14 kg per metre | Our calculation from the cross-section and density, not a measured value |
| Colours | Black, blue, green, red, translucent, white, yellow | - |
| Supplied as | 10 m or 25 m continuous coil | - |
Materials and compliance
The manufacturer's datasheet for this profile states the compound is:
- FDA 21 CFR 177.2600 compliant (rubber articles for repeated food contact)
- EC 1935/2004 compliant (food contact materials)
- WRAS approved material
- Free from TSE/BSE by-products
- Free from phthalates
Typical uses
- Bumper edge on 6mm stainless or aluminium machine guards, hopper lids and chute plates
- Cushioned trim on 6mm polycarbonate, acrylic and toughened glass screens
- Edge finish on 6mm plastic sheet such as HDPE and polypropylene panels in food and drink plant
- Seal strip on enclosure doors, hatches and inspection covers made from 6mm plate
- Colour-coded edges for hygiene zones
Which one do I need?
| Silicone round U channel 9mm x 25mm (this one) | 6mm panels, with a 16mm grip and a thick round bumper edge |
| Silicone round U channel 9mm x 19.5mm | About 5mm edges, shorter 14mm grip |
| Silicone round U channel 8mm x 21mm | 3mm panels, heavy 2.5mm walls |
| Silicone round U channel 15mm x 40mm, 8mm slot | Thicker panels up to about 8mm |
How much do I need?
Add up every edge you want to cover and allow about 5% for trimming. A guard with four 1.2m sides has 4.8m of edge, so a 10m coil covers two guards. For anything over 10m, one 25m coil (£990.00) costs less than two 10m coils (£1,500.00).
Fitting tips
- Deburr, clean and degrease the edge first.
- Start at one end and press the channel on by hand, working along the edge. Do not stretch it, or it will shrink back and leave gaps.
- Push it fully home so the panel edge sits against the flat slot floor, 16mm in.
- The thin 1.5mm walls follow gentle curves easily; on tight corners cut small V-notches in the side walls so the solid base bends without buckling.
- For a watertight or permanent joint, run a bead of silicone or polyurethane sealant into the slot before fitting.
Data sheet
Download the technical data sheet (PDF)
Questions
What panel thickness does this fit?
It is made for 6mm panels. The 6mm slot grips a 6mm sheet firmly; thinner sheet will be loose unless you bond it in, and thicker sheet will not go in.
How far does it cover the panel?
The slot is 16mm deep, so the trim covers 16mm down each face, with a 9mm solid rounded base over the edge itself.
How do I measure what I need?
Check the panel thickness with a caliper (it should be 6mm), then add up the length of all the edges. Order a 10m or 25m coil to cover that plus a little spare.
Is it suitable for food and drinking-water applications?
The datasheet states the compound meets FDA 21 CFR 177.2600 and EC 1935/2004 and is WRAS approved, so it is used on food processing and potable water equipment.
What temperatures can it take?
-50°C to +180°C continuous, so it suits freezers, ovens, dryers and hot washdown.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering, so it suits outdoor enclosures, hatches and marine panels.
How do I cut and join it?
Cut square with a sharp knife or shears. For a sealed butt joint, bond the ends with a silicone adhesive. On corners, notch the walls rather than cutting right through.
Does the colour change the performance?
No. All seven colours are the same compound and profile; choose a colour for visibility, colour-coding or to match your equipment.
Is it in stock?
Yes. All seven colours in both coil lengths are held in stock and dispatched from the UK.
Need help choosing the right edge trim? Contact our team, call +44 1282 277786 or email sales@industrial-polymers.co.uk.
Product details
| SKU | IP-SRUC-9X25-BLACK-10 |
|---|---|
| Weight | 3.31 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Round U Channel – 9mm x 25mm, 6mm Slot 16mm Deep – for 6mm Edges – 10m or 25m Coil