Rubber & FoamSKU IP-SILSP-4-0D1C-10-PLAIN
Silicone Sponge Rubber Strip – 4mm Thick – 25m Roll
Price shown updates with the option you pick.
This silicone sponge rubber strip, 4mm thick, is a white, medium-density closed-cell extrusion for sealing enclosures, light fittings and instruments against dust and moisture. It is sold by the 25m roll in 10mm, 15mm or 20mm widths, plain or self-adhesive.
At a glance
- 4mm thick medium-density closed-cell silicone sponge seal strip
- Extruded skin on all four sides for better resistance to dust and moisture than sheet-cut strip
- Working temperature -60°C to +230°C, up to 250°C intermittent
- WRAS approved material for potable water up to 85°C
- Helps enclosures reach up to IP65 ingress protection
- 10mm, 15mm or 20mm wide; plain or self-adhesive backing
Typical uses
- Door and lid gaskets on electrical enclosures and control cabinets
- Weather seals on exterior light fittings
- Dust and splash seals on handheld instruments
- Gap filling and edge cushioning on panels and covers
- Vibration damping pads in industrial equipment
Which one do I need?
| Option | Best for |
| 3mm thick | Very tight gaps and thin covers – see our 3mm strip |
| 4mm thick (this item) | Light enclosure doors and instrument lids where a 2-3mm gap needs closing |
| 5mm or 6mm thick | Larger gaps or uneven frames – see our 5mm strip |
| 10mm / 15mm / 20mm wide | Narrow flanges / standard frames / wide flanges needing more contact area |
| Self-adhesive | Fast fitting on clean metal or plastic without separate glue |
Technical drawing
Specification
| Material | Closed-cell silicone sponge, medium density |
| Thickness | 4mm |
| Widths | 10mm, 15mm, 20mm |
| Backing | Plain or self-adhesive |
| Colour | White |
| Density | 250 kg/m³ |
| Hardness | 47 Shore OO / 5 Shore A |
| Working temperature | -60°C to +230°C constant, 250°C intermittent |
| Water absorption | 0.2% |
| Tensile strength | 0.6 MPa |
| Elongation at break | 150% |
| Fire tests | FAR 25 / JAR 25 / CS 25 Appendix F Part 1 horizontal – pass; FMVSS 302 – pass |
| Unit of sale | One 25m roll |
How much do I need?
Measure the perimeter of the face you are sealing and add about 2% for trimming. Example: a cabinet door opening 600mm x 800mm needs 2 x (600 + 800) = 2,800mm, so 2.9m per door – one 25m roll seals eight doors of that size.
Fitting tips
- Clean and degrease the surface before fitting the self-adhesive version; press firmly along the full length.
- Lay the strip without stretching it, or it may pull back from corners over time.
- Design for about 30% compression (1.2mm on 4mm strip) and never more than 50%.
- Butt the ends tightly at joins; a dab of silicone sealant closes the joint fully.
Complete your project
- Silicone Sponge Rubber Strip – 3mm Thick – 25m Roll
- Silicone Sponge Rubber Strip – 5mm Thick – 25m Roll
- Silicone Sponge Rubber Strip – 6mm Thick – 25m Roll
Questions
Is this sponge strip suitable outdoors?
Yes. Silicone has excellent weathering resistance and stays flexible from -60°C to +230°C, so it suits exterior light fittings and enclosures.
Can it touch drinking water?
The material is WRAS approved for potable water up to 85°C.
Why does the skin on all four sides matter?
A strip cut from sponge sheet has open cells on its cut edges; this extruded strip is skinned all round, so it keeps out dust and moisture better.
Plain or self-adhesive?
Self-adhesive is quickest on clean, smooth surfaces. Choose plain if you will bond it with your own silicone adhesive or hold it in a channel.
How far should I compress it?
Aim for about 30% (1.2mm) for the longest life; above 50% the cells can break down.
Need help choosing? Contact our team.
Product details
| SKU | IP-SILSP-4-0D1C-10-PLAIN |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Sponge Rubber Strip – 4mm Thick – 25m Roll