Rubber & FoamSKU IP-SILSP-6-6-PLAIN
Silicone Sponge Rubber Strip – 6mm Thick, White – 25m Roll
Price shown updates with the option you pick.
This white silicone sponge rubber strip 6mm thick is an extruded closed-skin gasket strip for sealing, cushioning and gap filling from -60°C to +230°C. Choose the width you need from 6mm to 50mm, plain or self-adhesive; each variant is one 25m roll.
At a glance
- 6mm thick white silicone sponge strip, widths from 6mm to 50mm
- Plain or self-adhesive backing
- Extruded with a skin on all four sides for better dust and moisture sealing than sheet-cut strip
- Medium density, about 250 kg/m³; very soft at 47 Shore OO (about 5 Shore A)
- Works from -60°C to +230°C, with intermittent exposure to 250°C
- Good shape memory, recovering after compression; useful for gasket and vibration-damping duty
Typical uses
- Door and lid gaskets on electrical enclosures
- Sealing exterior light fittings against dust and moisture
- Cushion gaskets in handheld instruments
- Soft edge trim and gap filler around panels
- Vibration damping pads between metal parts
Which one do I need?
| Width | Typical job |
|---|---|
| 6mm to 10mm | Narrow flanges, light fittings and small instrument housings |
| 12mm to 20mm | Standard enclosure doors and lids, cabinet panels |
| 25mm to 50mm | Wide flanges, gap filling and anti-vibration pads |
Technical drawing
Specification
| Material | Silicone sponge, extruded with skin on all sides |
| Thickness | 6mm |
| Widths | 6, 8, 10, 12, 15, 20, 25, 30, 40 and 50mm |
| Backing | Plain or self-adhesive |
| Colour | White |
| Density | About 250 kg/m³ |
| Hardness | 47 Shore OO (about 5 Shore A) |
| Temperature range | -60°C to +230°C; intermittent 250°C |
| Recommended compression | Up to 30% of thickness; never more than 50% |
| Unit of sale | 25m roll per variant |
How much do I need?
Add up the perimeter of every opening you are sealing and allow about 20mm extra per joint. Example: a 600mm x 400mm enclosure door has a 2m perimeter, so a 25m roll seals 12 doors of that size.
Choose a width that covers the flange fully; the strip should land on the mating face along its whole length.
Fitting tips
- Size the gap so the 6mm strip is squeezed by about 30%, roughly 4mm installed height, for the longest seal life.
- Clean and degrease the surface before applying the self-adhesive version, and press it down firmly along its length.
- Lay the strip on without stretching it, so it does not shrink back and open the joints.
- Butt joints tightly or mitre corners; a dab of silicone sealant closes a joint in wet locations.
- Cut with sharp scissors or a fresh blade for clean square ends.
Complete your project
- White Silicone Sponge Cord – Closed Cell – 10m Roll
- Platinum Cured Silicone Strip – Translucent Food Grade
- TPE Sponge Seal – 14mm x 20mm with Adhesive Backing
Questions
How hot can this silicone sponge strip get?
It is rated from -60°C to +230°C in continuous use and copes with intermittent exposure up to 250°C without going brittle or melting.
How much should I compress it?
Aim for about 30% compression of the 6mm thickness. Do not exceed 50%, or the cells may break.
Why choose extruded strip over strip cut from sheet?
Extruded strip has a skin on every side, which keeps dust and moisture out better than a cut edge.
Is it reusable?
Its shape memory lets it recover after a panel is opened and closed, so it can be reused many times.
What widths are available?
6, 8, 10, 12, 15, 20, 25, 30, 40 and 50mm, each 6mm thick, plain or self-adhesive, on 25m rolls.
Need help choosing? Contact our team for practical advice on sizes, materials and fitting.
Product details
| SKU | IP-SILSP-6-6-PLAIN |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone Sponge Rubber Strip – 6mm Thick, White – 25m Roll