
Rubber & FoamSKU IP-TPES-14X20-STD
TPE Sponge Seal – 14mm x 20mm with Adhesive Backing – 50m Coil
This black TPE sponge seal measures 14mm x 20mm and features a dual hardness construction, combining a solid TPE base with a hollow TPE foam tubular section. Designed to provide a reliable air and watertight barrier, it is supplied as a 50m coil with an adhesive backing for straightforward installation.
At a glance
- 14mm outer diameter tubular section with two sealing ribs
- Dual hardness: solid base (57° Shore A) and soft foam tube (15° Shore A)
- Fills clearances from 12mm to 20mm
- Supplied with a self-adhesive backing
- Non-marking and 100% recyclable
- Operating temperature range of -35°C to 75°C
Typical uses
- Door and window sealing
- Industrial enclosures and cabinets
- Automotive and vehicle applications
- Surface and impact protection
- Pipe insulation
Technical drawing
Specification
| Material | TPE (Thermoplastic Elastomer) |
| Base Hardness | 57° Shore A |
| Tube Hardness | 15° Shore A |
| Overall Size | 14mm x 20mm |
| Clearance to Fill | 12mm to 20mm |
| Colour | Black |
| Operating Temperature | -35°C to 75°C |
| Weight | 94g per metre |
| Tolerance Class | ISO 3302-1 E2 – L2 |
Installation and care
The adhesive backing provides a fast and cost-effective mounting method. Ensure the application surface is thoroughly cleaned, degreased, and dry before applying the seal to achieve the strongest possible bond. The seal can be easily cut to the required length using a heavy-duty knife or sharp scissors.
Fitting tips
- Clean the mating surface with a suitable solvent before application.
- Apply firm, even pressure along the entire length of the base to ensure good adhesive contact.
- Avoid stretching the seal during installation, as it may shrink back over time.
- Allow the adhesive to cure fully before subjecting the seal to heavy compression.
Complete your project
- Silicone L Profile – 10mm x 30mm x 5mm – 10m or 25m Roll
- Silicone L Profile – 9mm x 11mm – 25m Coil
- Silicone L Profile – 19mm x 13mm, 1mm Wall – 10m or 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Can this seal accommodate uneven surfaces?
Yes, the hollow TPE foam tubular section is highly compressible (up to approximately 7mm), allowing it to effectively seal against irregular or uneven surfaces.
Is this suitable for outdoor use?
Yes, the TPE material offers good resistance to UV, weathering, and chemical abrasion, making it suitable for both interior and exterior applications.
Will the seal leave marks on my equipment?
No, the TPE material used in this seal is non-marking, helping to preserve the appearance of the surfaces it contacts.
How do I cut the seal?
Despite its durability, the seal is flexible and lightweight, and can be easily cut to size using a heavy-duty knife or a pair of scissors.
If you need further assistance, please contact our team.
Product details
| SKU | IP-TPES-14X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:TPE Sponge Seal – 14mm x 20mm with Adhesive Backing – 50m Coil