Rubber & FoamSKU IP-STSP-5X10-BLACK
Silicone T Seal Profile – 5mm x 10mm, 60° Shore A – 25m Coil
This silicone T seal 5mm x 10mm has a rounded, domed 5mm flange on a thick 4mm stem, giving a soft, full sealing face over narrow tracks and structural gaps. It is made from food-grade, WRAS-approved 60 Shore A silicone that stays flexible from -50°C to +180°C, and is sold as a continuous 25m coil in seven colours.
At a glance
- 5mm domed flange x 10mm overall height
- Thick 4mm stem for a firm hold in the slot
- 60° Shore A for reliable compression and recovery
- FDA, EC1935/2004 and WRAS approved silicone
- Resists UV, ozone and weathering; works from -50°C to +180°C
- Supplied as one continuous 25m coil
Typical uses
- Food processing machinery and catering units
- Gap seal for HVAC ducting and commercial heating enclosures
- Weatherproof marine hatch boundaries and structural joints
- Rubber T trim for vehicle ECU bays and dashboard interfaces
- Brewery pipework and drinking water equipment
Which one do I need?
| Profile | Best for |
|---|---|
| 5mm x 10mm domed, 60 Shore A (this item) | Deep slots up to 4mm wide where a rounded, cushioned face is wanted |
| 4mm x 8.5mm T seal | Narrower slots with a flat flange |
| 6mm x 5.2mm, 80 Shore A | Shallow tracks needing a short, firm stem |
| 10mm x 8mm T seal | Wider joints needing a broad cover flange |
Technical drawing
Specification
| Material | Silicone (FDA 21 CFR 177.2600, EC1935/2004, WRAS approved) |
| Width (flange) | 5mm |
| Overall height | 10mm |
| Stem thickness | 4mm |
| Hardness | 60° Shore A |
| Operating temperature | -50°C to +180°C |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Unit of sale | 25m coil |
Installation and care
The silicone compresses smoothly under pressure and recovers its shape, so the domed face keeps sealing over time. Clean the slot, measure the length needed and cut square with a sharp knife. Press the stem fully home and run your thumb along the dome so it sits evenly. Clean with warm soapy water; avoid solvents.
Fitting tips
- Clean out the slot thoroughly before fitting for a secure grip.
- Mark cuts with a non-permanent marker and cut with a sharp utility knife or shears.
- Use a silicone adhesive in the slot where the joint vibrates or moves.
- Do not stretch the seal while fitting, or it may shrink back.
Complete your project
- Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 25m Coil
- Silicone T Seal Profile – 10mm x 8mm – 25m Coil
Questions
Is this T seal suitable for food contact?
Yes. It complies with FDA 21 CFR 177.2600 and EC1935/2004.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering.
What temperatures can it withstand?
It works from -50°C up to +180°C.
Is it safe for drinking water?
Yes. It is WRAS approved for drinking water applications.
What does the domed flange do?
The rounded face spreads contact pressure and gives a softer, cushioned seal than a flat flange, and is easier to wipe clean.
Need help choosing the right gap seal? Contact our team for advice.
Product details
| SKU | IP-STSP-5X10-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 5mm x 10mm, 60° Shore A – 25m Coil