Rubber & FoamSKU IP-SILT-3X6.5-BLACK
Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
This 3mm x 6.5mm silicone T seal profile is a high-performance extrusion designed to press into narrow channels and structural gaps, creating a flush, airtight and moisture-proof barrier. Manufactured from premium 50° Shore A silicone, it is fully FDA and WRAS approved, making it suitable for food processing, drinking water applications, and demanding industrial environments. It is supplied as a 25m coil.
At a glance
- 3mm wide x 6.5mm high T-shaped profile
- 50° Shore A hardness for excellent flexibility and compression
- FDA 21 CFR 177.2600 and EC1935/2004 compliant for food contact
- WRAS approved for use with public water supplies
- Broad operating temperature range of -50°C to +180°C
- Available in 7 highly visible colours for safety and coding
- Supplied in a continuous 25m coil
Typical uses
- Commercial refrigeration trims and warming oven borders
- Stainless steel counter guards in catering equipment
- Access door seals and air handling unit joints in HVAC systems
- Weatherproof hatch boundaries and windows in marine environments
- High-risk door trims and custom engine bay seals in vehicles
Technical drawing
Specification
| Material | Silicone (100% free from TSE/BSE bi-products and Phthalates) |
| Profile Width | 3mm |
| Profile Height | 6.5mm |
| Base Thickness | 2mm |
| Hardness | 50° Shore A |
| Density | 1.15 g/cm³ |
| Tensile Strength | 12 N/mm² |
| Elongation at Break | 640% |
| Operating Temperature | -50°C to +180°C |
Installation and care
This silicone T section is designed to be pressed firmly into a matching slot or channel. It can be cut to length easily using standard tools. For permanent fixing, it can be bonded using a suitable high-retention silicone adhesive.
Fitting tips
- Thoroughly clean and dry the target slot before installation to ensure a good fit and strong adhesion if using glue.
- Measure the required length and mark the silicone with a non-permanent marker before cutting.
- Use a sharp utility knife or heavy-duty shears for a clean, square cut.
- Press the vertical leg of the T seal firmly into the gap, ensuring the upper wings sit flat and flush against the mounting surface.
Complete your project
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 60 Shore A – 25m Coil
- EPDM Round U Channel – 9mm x 9mm – Fits 1.6mm Panel – Cut Length or 30m Coil
- EPDM Square U Channel – 9mm x 8mm – Fits 6mm Panel – Black Rubber Edge Trim
Data sheet
Download the technical data sheet (PDF)
Questions
Is this seal suitable for outdoor use?
Yes, the silicone material provides excellent resistance to UV rays, ozone, and outdoor weathering.
Can it be used in food preparation areas?
Yes, it is fully FDA compliant and safe for use in food processing and catering environments.
Is it safe for drinking water applications?
Yes, the material is WRAS approved, meaning it is certified safe for public water supply applications.
How do I cut the seal?
The seal can be easily cut to your required length using a sharp utility knife or industrial shears.
If you need help selecting the right profile for your application, please contact our team.
Product details
| SKU | IP-SILT-3X6.5-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil