Rubber & FoamSKU IP-STSP-6X5.2-BLACK
Silicone T Seal Profile – 6mm x 5.2mm, 80 Shore A – 25m Coil
This silicone T seal 6mm x 5.2mm is a firm 80 Shore A gap seal with a wide 6mm flange and a short, stiff 3.2mm stem. It presses into shallow tracks and panel joints to give a flush barrier against moisture, dirt and heat loss, and is sold as a continuous 25m coil in seven colours.
At a glance
- 6mm wide flange x 5.2mm overall height
- Firm 80 Shore A silicone holds its shape in shallow tracks
- FDA, EC1935/2004 and WRAS approved material
- Works from -50°C to +180°C
- Resists UV, ozone and weathering
- Supplied as one continuous 25m coil
Typical uses
- Food processing lines and catering equipment
- Brewery pipework enclosures and water treatment equipment
- Rubber T trim for HVAC ducting, ovens and furnace panels
- Marine hatch boundaries and windows
- Vehicle door trims and engine bay panel joints
Which one do I need?
| Profile | Best for |
|---|---|
| 6mm x 5.2mm, 80 Shore A (this item) | Shallow tracks needing a short, firm stem and a wide 6mm face |
| 4mm x 6.5mm T seal | Narrower slots with a slightly deeper stem |
| 4mm x 8.5mm T seal | Narrow, deep slots where extra grip is needed |
| 5mm x 10mm, 60 Shore A | Wider gaps and a softer domed sealing face |
Technical drawing
Specification
| Material | Silicone |
| Width (flange) | 6mm |
| Overall height | 5.2mm |
| Stem thickness | 3.2mm |
| Flange thickness | 2mm |
| Hardness | 80 Shore A |
| Density | 1.20 g/cm³ |
| Tensile strength | 10 N/mm² |
| Elongation at break | 440% |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC1935/2004, WRAS |
| Unit of sale | 25m coil |
Installation and care
Clean the track thoroughly, measure the length you need and mark the cut on the silicone. Cut square with a sharp utility knife or heavy-duty shears. Where the joint moves or vibrates, run a bead of silicone adhesive into the channel. Press the stem fully home and smooth the flange flat along the edge. Clean with warm soapy water.
Fitting tips
- Keep the channel free of debris and grease.
- Use a non-permanent marker to mark cuts accurately.
- Avoid stretching the seal during insertion to prevent shrink-back.
- The firm 80 Shore A grade needs a snug track; for loose slots choose a softer grade.
Complete your project
- Silicone T Seal Profile – 3mm x 6.5mm, 50° Shore A – 25m Coil
- Silicone T Seal Profile – 9mm x 8mm, Barbed Push-In Leg – 25m Coil
- Silicone T Seal Profile – 10mm x 8mm – 25m Coil
Questions
Is this seal suitable for drinking water?
Yes. The material is WRAS approved for use with drinking water.
Can it withstand high temperatures?
Yes. It works from -50°C up to +180°C, so it suits ovens, furnaces and heating enclosures.
Is it safe for food contact?
Yes. It complies with FDA 21 CFR 177.2600 and EC1935/2004.
Why choose 80 Shore A?
The harder grade keeps the short stem rigid, so it pushes into shallow tracks without folding and holds its edge under foot or tool traffic.
Need help choosing the right gap seal? Contact our team for advice.
Product details
| SKU | IP-STSP-6X5.2-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 6mm x 5.2mm, 80 Shore A – 25m Coil