Rubber & FoamSKU IP-SITS-6X8-L3-25M-BLK
Silicone T Seal Profile – 6mm x 8mm, 3mm Leg – 70 Shore A – 25m Coil
A solid silicone T seal 6mm wide and 8mm tall, with a 3.0mm square-cut head on a 3.0mm leg. Push the leg into a slot about 2.8–3.0mm wide and the head sits on the face of the frame, closing the gap against dust, splash, draughts and heat. The long 5mm leg keys deep into the slot, and the head stands 3mm proud of the frame to take up larger or uneven gaps than a thin-headed T seal. This version is moulded in 70 Shore A silicone and comes in seven colours, all at the same price. Each coil is one unbroken 25m length.
Check the leg before you order. We sell two different 6mm × 8mm silicone T seals. This one has a 3.0mm leg and 3.0mm head. The other has a 4.0mm leg and 4.0mm head in 60 Shore A: see the 4.0mm leg version.
At a glance
- Head 6.0mm wide × 3.0mm deep; leg 3.0mm wide; 8.0mm overall height (5.0mm of leg below the head)
- 1.5mm shoulder each side of the leg, so the head covers both slot edges
- 70 Shore A solid silicone rubber, working range -50°C to +180°C
- The manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact. It is a WRAS approved material.
- Black, white, translucent, red, green, blue or yellow, all at the same price
- Held in stock in every colour
Which 6 × 8mm T seal do I need?
| 4mm leg version | 3mm leg version | |
|---|---|---|
| Fits a slot about | 3.8–4.0mm wide, 4mm or more deep | 2.8–3.0mm wide, 5mm or more deep |
| Head | 6.0 × 4.0mm | 6.0 × 3.0mm |
| Shoulder each side | 1.0mm | 1.5mm |
| Hardness | 60 Shore A (medium) | 70 Shore A (medium-firm) |
| Compression set (22 h at 175 °C) | 31 % | 40 % |
| Our part number | IP-SITS-6X8-L4-25M | IP-SITS-6X8-L3-25M |
| View | This listing |
Choose by the width of your slot first: the leg must grip the slot. If both would fit, the 4mm leg / 60 Shore A version is a little softer and recovers better after long hot compression; the 3mm leg / 70 Shore A version is firmer and wider at the shoulders.
Typical uses
- Slot seals in machine guards, enclosures and aluminium profile frames
- Access doors and inspection hatches on food, bakery and packaging machinery
- Doors and lids on ovens, provers, warming cabinets and dryers up to +180°C
- Air handling units, fan coil housings and ductwork access panels
- Heat sealing and insulation equipment, HVAC and vehicle body panels
- Outdoor enclosures and hatches, where UV and ozone crack other rubbers
- Colour-coded seals for hygiene zones (red, green, blue, yellow)
Technical drawing
![]()
Full specification
| Property | Value | Test method |
|---|---|---|
| Dimensions | ||
| Profile type | Solid T section, square-cut flat head, centred leg | – |
| Overall height | 8.0 mm | – |
| Head width | 6.0 mm | – |
| Head depth | 3.0 mm | – |
| Leg width (base thickness) | 3.0 mm | – |
| Leg length below head | 5.0 mm (reference, 8.0 − 3.0) | – |
| Shoulder each side | 1.5 mm (reference, leg centred) | – |
| Suits slot | Approx. 2.8–3.0 mm wide, at least 5.0 mm deep | – |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Length per coil | 25 m, one continuous length | – |
| Material and physical properties | ||
| Compound | Solid silicone rubber | – |
| Hardness | 70 Shore A | DIN ISO 48-4 |
| Density | 1.18 g/cm³ | DIN EN ISO 1183-1, method A |
| Tensile strength | 11.3 N/mm² (11.3 MPa) | ISO 37, type 1 |
| Elongation at break | 530 % | ISO 37, type 1 |
| Tear strength | 31 N/mm (31 kN/m) | ASTM D624, die B |
| Compression set | 40 % after 22 h at 175 °C | DIN ISO 815-1, type B, method A |
| Rebound resilience | 55 % | ISO 4662 |
| Service conditions | ||
| Working temperature | -50 °C to +180 °C | – |
| Environmental resistance | Ozone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation | – |
| Supply | ||
| Colours | Black, white, translucent, red, green, blue, yellow | – |
| Approx. weight | About 39 g per metre, 0.97 kg per coil (calculated from the 33 mm² section and density) | – |
| Unit of sale | 1 coil of 25 m (£27.00 per metre inc VAT) | – |
| Our part number | IP-SITS-6X8-L3-25M-<colour> | – |
Materials and compliance
These are the claims the manufacturer makes in writing for this profile. Ask us if your file needs the certificate or declaration.
| Claim | What it means for you |
|---|---|
| FDA 21 CFR 177.2600 | The compound meets the US rule for rubber articles in repeated contact with food. |
| EC 1935/2004 | The compound meets the EU framework regulation for materials that come into contact with food. |
| WRAS approved material | The material is accepted for contact with drinking water in UK water fittings. |
| Free from TSE/BSE by-products | No animal-derived ingredients that carry TSE/BSE risk. |
| Phthalate free | Made without phthalate plasticisers. |
The approvals cover the material as supplied. Whether your finished assembly complies also depends on its design, its cleaning regime and the other materials in it, so check it against your own requirements.
Will it fit my slot?
Measure the slot's width and depth. The leg is 3.0mm wide, so it grips best in a slot of about 2.8–3.0mm. The slot should be at least 5.0mm deep so the head can sit down on the frame; a deeper slot is fine. If your slot is nearer 4mm wide, you need the 4.0mm leg version instead.
How much do I need?
Add up the length of every slot and allow about 5% for trimming and joints. For example, a 600mm × 400mm guard door needs 2.0m, or about 2.1m with the allowance, so one 25m coil seals 11 doors of that size.
Fitting tips
- Clear any old seal, grease and grit out of the slot, and let it dry
- Start partway along a straight side, not at a corner
- Press the leg in with your thumb or a small plastic roller as you go. A drop of soapy water helps it slide into a tight slot.
- If the slot is loose or the seal must not move, run a bead of silicone adhesive into the slot first
- Lay the seal into corners rather than pulling it round them. Stretched silicone shrinks back and opens a gap.
- Cut the end slightly long with a sharp knife and push the ends together; a dab of silicone adhesive keeps the joint closed
FAQ: frequently asked questions
What slot does it fit?
A slot about 2.8–3.0mm wide and at least 5.0mm deep. The head is 6mm wide, so it overlaps the slot by 1.5mm each side and covers the edges.
Which way up does it go?
The 3.0mm leg goes into the slot, and the wider, flat head sits on the surface, facing the door, lid or panel it seals against.
What is the difference between your two 6mm × 8mm T seals?
They have different legs. This one has a 3.0mm leg and a 3.0mm deep head in 70 Shore A silicone. The other has a 4.0mm leg and a 4.0mm head in 60 Shore A. They are not interchangeable: pick the one whose leg matches your slot.
Can it be used near ovens and heaters?
Yes. It is rated -50°C to +180°C. That suits oven and warming-cabinet doors, drying equipment and heater housings, as long as the seal itself stays at or below that temperature.
Is it safe near food or drinking water?
The manufacturer states the compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact, and it is a WRAS approved material. We can send the declaration if your audit needs it.
How accurate are the dimensions?
The profile is extruded to ISO 3302-1 class E2, the normal tolerance class for extruded rubber sections. Check your slot against the drawing before you order.
Will it flatten over time?
Its compression set is 40% after 22 hours at 175°C, a demanding hot test, so it keeps its recovery well through repeated heat cycles.
How do I cut and join it?
Cut it with a sharp knife or shears. To join it, use a silicone adhesive or silicone sealant; most general-purpose glues and contact adhesives will not bond to silicone rubber.
Is every colour the same price?
Yes. All 7 colours cost £675.00 per 25m coil inc VAT (£27.00 per metre).
Complete your project
- Silicone T Seal Profile – 6mm x 8mm, 4.0mm leg, 60 Shore A (for wider slots)
- Silicone T Seal Profile – 5mm x 8.5mm
- Silicone T Seal Profile – 6mm x 5.2mm (low-profile head)
Not sure it will fit? Send us a photo, or the width and depth of the slot, and we will check it for you. Contact our team.
Product details
| SKU | IP-SITS-6X8-L3-25M-BLK |
|---|---|
| Weight | 2.2 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone T Seal Profile – 6mm x 8mm, 3mm Leg – 70 Shore A – 25m Coil